20 Most Recent
Olevia LT42HVi 42 in. LCD Television - Page 9 Questions & Answers
42 inch flat screen shows v-chip block tv-14 lsv
V-chip Block
TV- 14 - this is a rating for movies and TV programs. Basically means PG-13 like the old movie theater rating.
lsv- means, language, ***, violence.
You TV can be set to block these programs.
In you menu look for a catagory called "locks" or "ratings"
there you will find the options of what can be veiwed and what will be blocked.
if you everything to be available, just disable all settings.
if you want to choose different things to be allowed, just click on the icons and they become blocked.
My 2342i is screen is
Check your backlight inverter and CCFL bulbs. As the CCFL bulbs age this is a common problem. The bulbs are not cheap, however. They run nearly $15-$20 each for your size flatscreen. Replacing the bulbs is as easy as changing a light bulb, you just have to get to them as they are in the flat panel.
Please rate if this helped :)
My olevia 42 in the
Hello Bernie - Using your remote, press the Menu button, move to the right to the Screen menu, On this menu go down and choose Aspect. Here you have four options, Full, 4:3, 16:9 and Panorama.
Depending on your source material one of these will give you the image you want for what you are watching.
If you're watching TV through a cable or satellite box then there will be similar settings in that set-top box that will also affect screen settings. Not knowing if you are using a STB or what kind I can't help you directly with that. If what I suggested doesn't help and you are using cable or satellite call your providers tech support to learn how to change those settings.
Pleasant viewing and thanks for asking Fix Ya.
Mikeywaf
I have a 37 inch Olevia tv and can't find a remote
We would be happy to help you with getting your DISH Network remote to control your Olevia TV. We're going to start by pressing and holding the TV button located on the top of your remote until all mode button back lights come on, and then release. Use the number buttons to enter the codes for your Olevia tv; here some of the codes we currently have: 910, 506, 578, 580 and 564. Press the pound (#) button. To check that the code works try several different functions on the remote to make sure it will properly operate the TV. Remember that some codes may not be compatible with your equipment. If this is the case, try the other codes listed for your Olevia TV until you find one that is compatible with your equipment.
We hope this helps and thank you for being a valued DISH Network customer!
Phillip Chang
DISH Network Customer Service Representative
I own an olevia lt42hvi;
I have a Olevia 532-b12 and it may be similar.
Hit the small round menu button on the remote.
A pinwheel shape should appear on the upper left part of the screen.
Use the up/down and left/right direction keys to find picture,
and you should be able to adjust brightness, contract, etc.
When I turn on my
Either your data flat wire is disconnected or your data board is defective.If you open the back panel(unplug the unit first)observe the flat wire if it is firmly hooked up to the connectors,if it is your Data board is defective,replace it.Some models have their video/data processor with the main board,if this is the case with you then you have to replace the main board too.White screen means your back lighting is operating well and the sound means the tuner and amplifier is fine too.So concentrate on the Data board and it is found in between the tuner and the LCD screen.
I can not remove the stand..........to hang on
There should be a few philips type screws on the rear of the set at the bottom. There are either 2 or 4 large screws that hold it to the stand. Also, the instructions that come with this model describe how to convert it for wall mounting. Every one of these sets I work on has 4 screws that hold it to the stand and I have to use a long philips screwdriver to get them out before I can begin the repair. Better to have a magnetic tip on the screwdriver for easy removal. Let me know if I can be of anymore help. Good Luck, Russmann.
It wont get power. how
check the power supply output there should be 5 volts on the output this turns on the main board if there is no 5 volts then the power supply is at fault also look for open capacitors on the power supply this can also be a major problem causing the tv to not power up
Not finding what you are looking for?
