hope this is of some help
the thermal fuse is blowing because the unit is getting to hot you replacing the thermal fuse has not cured the problem, and it will blow again , the problem is the thermostat is set to high or is faulty / allowing the unit to go over temperature hence the thermal fuse blowing
its the control stat that you should be looking at. good luck
Defective temperature sensor is my guess, try running white vinegar through it a few times, the sensor may have hard water deposits on it which can alter the readings.
Check the home panel circuit breaker first. Then plug the brewer in to another outlet. If that doesn't work, there is a chance that the switch is bad. Happens too often on Bunnomatics.
Most likely there is electricity short fall somewhere, check socket, if not then open machine and check if all cables are in place. Check for current.
If that doesn't do then it must be electronics.
