20 Most Recent Navman PiN 570 GPS Receiver - Page 3 Questions & Answers

can you explain what you are hard-wiring?

check the backlight power saving settings

RECENTLY I DID PRETTY MUCH THE SAME THING
SO HERE IS WHAT I DID :
" I TURNED IT ON AND HIT THE HARD RESET AND THEN LEFT IT ON TILL ALL P[OWER WENT AWAY FROM UNIT
SECOND I HAD TO DOWNLOAN A NEW VERSION FOR MY UNIT ; MEANING MAP
THEN I TOOK THE BATTERY OUT AND AND PLUGED IN MY USB CORD AND IT TOOK IT
I PUT MY BATTERY IN AND CHARGED OVER NIGHT AND WELL IT SEEMS LIKE A LOT TO DO BUT FROM WHAT I UNDERSTAND MY DRIVER GOT BOOTED OFF THE UNIT AND ANOTHER DRIVER FOR A MODEL WAS ATTACHED
HOW I DONT KNOW BUT MY UNIT WORKS NOW FOR THE LAST 4 MONTHS NO PROBLEMS

HOPE THIS HELPS YOU OUT RICHARD FROM CHICAGO

www.thepiratebay.organd search !

maybe there is a flat or stuffed lithium battery or battery charging circuit in the pin 570.
fix:
leave unit to charge for 24 h
if the battery still dosnt charge because it is over discharged, then you may be able to push some charge in it after the battery is unplugged, after opening the case, and removing the circuit board

Hello,

Start Here:
http://www.navman.com/
Then select your region. They have an online store to buy whatever you need.

Cheer mate,
Worldvet

the 2 screws and then its hookeby plastic clips be careful cause clips break easy
you need a very fine flatblade screwdriver
richard from chicago

visit the micro$oft site and download the current version of Active Sync
http://www.microsoft.com/windowsmobile/activesync/default.mspx

you may also need the micro$oft outlook program, which is part of "ms office"

LET UNIT POWER 100 PERCENT DOWN AND PULL BATTERY THEN MASTER RESET
THEN PLUG IN USB CORD AND SEE IF IT WILL LET YOU REINSTALL WITH OUT BATTERY IN IT

THAT HOW I JUST FIXED MINE 4 MONTHS AGO

POWER UP AND THEN LET IT DRAIN 100 PERCENT AND THEN DO MASTER RESET
HOOK UP USB WITHOUT BATTERY IN IT AND SEE IF YOUR CAN REINSTALL SOFTWARE
I JUST HAD SAME PROBLEM

maybe there is no memory caused by a flat or stuffed lithium battery or battery charging circuit in the pin 570.
fix:
leave unit to charge for 24 h
if the battery still dosnt charge because it is over discharged, then you may be able to push some charge in it after the battery is unplugged, after opening the case, and removing the circuit board.

Possible cause is that you don't have Michigan map loaded. Go to the navigation menu, then Setup, then Map. See if the map for Michigan is checked.

Low or flat battery. Connect to mains charger and fully charge.

Go to the Navman web site and you will find your answer.

Not for that model. You can for others, you buy the UK map. I recommend the Garmin Drive 50 for the UK. I bought one for a friend in the UK and bought one for me here in Canada. https://www.navman.com.au/ezy15#Features https://www.navman.com.au/international-maps https://www.google.com/search?q=Australian+Navman+EZY15+UK+map ..

hello peter To restore the device to factory default settings, go to Settings > Device > Restore factory defaults. Please note that you will lose all stored information on the unit including addresses (ex. MY Places, Recent Locations). you can aslo contact the customer care

This is an Australian unit. We are in North America. This link might work better for you. https://www.google.com/search?q=navman+Tracker+5500+not+locking+on+to+satellites ..

If your Navman GPS device has frozen on the main screen, you may be able to resolve the issue by resetting the device. Here are a few steps you can try to reset your Navman GPS device:

1. Press and hold the power button on the device for about 10 seconds until it turns off.
2. Disconnect the device from the power source and remove any batteries or memory cards.
3. Wait for a few minutes, then reinsert the batteries or memory cards and reconnect the device to the power source.
4. Press the power button to turn the device back on.

If the device does not turn on or the issue persists after resetting the device, it is possible that there may be a more serious problem with the device. In this case, you may want to consider seeking assistance from Navman customer support or a professional repair service. It is also a good idea to regularly update the software and maps on your Navman GPS device to ensure that it is functioning properly and has the most up-to-date information available. You can usually find software updates and map updates on the Navman website or through the manufacturer's support resources.

This looks like an older unit and IIRC it is Australian, was discontinued and bought up by another company. Try a full Hardware Reset. Tiny hole, back, right side https://manualmachine.com/navman/ezy100t/1216368-user-manual/#19 https://www.google.com/search?q=Navman+ezy+100t+lost+its+voice ..