20 Most Recent
Keurig B60 Coffee Maker - Page 9 Questions & Answers
No water coming out of keurig
You need to descale it. Mine usually just stops working like that without the descale light coming on until after I start the descale procedure (go figure). This is from the Keurig website. Don't bother starting until after you get a bottle of white vinegar...in fact, get TWO bottles because you will probably need it again in the future.
http://www.keurig.com/customer-service/brewer-registration-and-support/~/media/files/keurig%20brewer%20manuals/de-scaling_instructions.ashx
Keurig reads prime
Lift the reservoir, then reseat it. This will clear the prime message. If it repeatedly comes back then your machine is dead. If in the year warranty, call Keurig they will ship you a replacement. A common Keurig problem.
Keurig coffee maker makes loud noise single cup
The brewer should be de-scaled at least every 3-6 months. Scale is harmless, but if left unattended, it can hinder optimal brewer performance. De-scaling your brewer regularly helps maintain the heating element, removable water reservoir and other parts of the brewer that come in contact with water. Better water quality and water heating means a better cup of coffee, tea, hot cocoa or iced beverage. We recommend de-scaling your brewer at least every 6 months (every 3 months if your water has a high mineral content). The de-scaling process involves using 48 ounces of undiluted white vinegar.
Take 48 oz of white vinegar. place in tank. pretend you are making coffee (Do No Use K Cup). let the water fill you mug. then empty that mug. Do it again until tank is empty. then let sit for 4 hours.
Then fill with fresh water to the top. let that tank of water run thru. towards the end taste the water.
If you taste vinegar..use more clean water, until the taste is ok.
I tried to help you. Please help me and Vote/Rate this response. Thanks and good luck
Water leakage in back
buy one made in usa if you can find one...everything is made in china.its a dam shame,,,
Keurig b60
Keurig brewers are great little machines but from time to time they all need a little TLC. The brewers have countless components that must all work together to deliver the perfect cup. Most common problems with these machines are caused by calcium/lime buildup. If you've tried the manufacture's suggested vinegar descalation methods to no avail, give this a try. PRESSURIZED WATER FLUSH: - Unplug machine, remove water reservoir & set aside. - locate water inlet opening (this is the hole in which the reservoir drains) - using your garden hose, place nozzle flush with water inlet opening, direct water stream into this opening while slowly increasing water flow. - BE CAREFUL NOT TO GET ELECTRONICS OF THE MACHINE WET - water should begin pouring from beverage dispenser & overflow/reservoir pipe. - continue flushing machine for 30 seconds. You may notice chalky white particles in the water flowing from machine (this stuff is the cause of your problems). Your machine should be as good as new now! Repeat process is problems persist. You may also use compressed air to clean the machine and other commercial descalation products.
Cold coffee keurig b60
What do you mean by tank? IF you are talking about the reservoir that has the water in it when you fill it, then that would have nothing to do with the heating of the water.
Keurig Leaks Water Before Brewing
If it is in warranty, this unit needs factory services. Unfortunately the cheap labor and rapid production rates are more important to the company than Quality.
Not finding what you are looking for?