Top 20
Universal Remote Control MX-850 LCD Remote Control Questions & Answers
I had to get a new TV HD receiver. How do I get it
What kind of receiver did you get? DirecTV, Dish, or something else? This remote comes with software and cables you can connect to your computer. Once you install it, and connect the device, you can program it to connect with your specific electronic components. You may need your existing/original remotes to help get everything set up, but usually that is a one-time process.
The buttons are requiring much
Hi,
You need to have an
electrical contact cleaner to resolve the issue. That is very common problem which is caused by dirt build up inside. Spray it with the contact cleaner (don't wipe), wait a few minutes, re-assemble the unit and then you can use it again like new.
This is widely available at the electronics supply, homedepot, computer supply, etc...
Jdvillanueva
Mx850 remote stopped working. replaced
Remote control have any screws at all? All arond it frame?Yes.Can u take it parts?Tries a damp cloth soak with some rubbing alcahols.Clean the whole PCB board and the battery - + resolders the battery - + steal plate connections too if possible and have a soldering iron equipment.Wait awhile like 10 or 20 mins put it back togetther again,will have a 50/50 chances fo it to work again.
I have a 1997 Daenyx
There should also be an item in the setup menu called INPUT FORMAT.
This is NOT the same as the INPUT SOURCE which is the usual tv, cable, dvd, ypbpr, vga etc.
Try selecting different input formats until you find one that works with your cable signal.
Use the menu buttons on the tv itself if you are unable to access these options via the remote.
Comment back here to this page if you require further assistance.
Thank you and good luck.
Joe.
My unit hit a wooden
The unit hit the floor pretty hard?Yes,it probally have micro fractures on it PCB board.Sorry it probally junk now.Buy a new unit.
Time Delay in changing channels. Batteries new.
Hello
Your remote controls' infrared light emitting frequency may have changed to a little. It may be due to an IC trouble inside it, or oscillator crystal used as standard reference frequency generator. You just open your remote control and replace the oscillator reference crystal first. It can be resolder out from its internal printed circuit board, and can be got from any electronic spare part shop and is cheap in price too. Note its frequency marked on it and buy. If it doen't help, the Ic may be damaged, and it is best for you to buy a new one, rather than trying to replace that IC. OK
Our usual procedure: Main, SAT,
You can get a replacement Remote from Mats Electronics 1-800-628-1118
or Encompass Parts 1-800-638-3328 Parts Store.com 1-866-925-7278
We cannot get video from
Hi there,
Well first of all let us know the model number of your DVD player, also tell us what kind of cable you use to connect the DVD player and the TV.
Thanks
Same problem
If the frequency shifted you would have no more remote function, sounds like interference, since the rcvr " working" light stays on, its "picking" something up. try relocating the rcvr. also maybe another remote can confirm your suspicions. good luck Julio
[email protected]
Directv Codes
173 or 193 is for a directv box. It may be manufactured by another company, hughs net, rca, ect.
Not finding what you are looking for?