20 Most Recent Aastra Telecom Aastra M9417CW 2-Line corded Phone GREY Questions & Answers

probably means that you either have a missed call or message on your machine try deleting the call history and deleting all old messages. that might turn it off

google speakerphone 210 manual for choices.

Question edited for clarity. Question moved from Video Consoles category. Trying to find a manual. Are you sure that model is correct? Eircom should give you a manual PDF. https://www.google.com/search?q=Eircom+perform+100+manual and https://www.google.com/search?q=Eircom+perform+100 ..

Hello
Direct marketing is a sometimes controversial sales method by which advertisers approach potential customers directly with products or services. The most common forms of direct marketing are telephone sales, solicited or unsolicited emails, catalogs, leaflets, brochures and coupons. Successful direct marketing also involves compiling and maintaining a large database of personal information about potential customers and clients. These databases are often sold or shared with other direct marketing companies.
for more information visit http://www.wisegeek.com/what-is-direct-marketing.htm
Hope this helps if so do rate the solution

Good question but no 'make model (what it is). Base units have an antenna, make sure it is extended. Make sure the batteries in the satellite hand sets are good as they send out the signal to the base unit to be 'in range'. Not sure about the PIN request, refer to the manual. They are all online. Google make model manual ..

NiMH voltage : 1.2 V capacity : 750 mAh

1. First, try resetting your phone by powering it off completely and then turning it back on after a few seconds. This can sometimes resolve minor software glitches.
2. If the problem persists, you can try contacting your mobile service provider and ask them to reset your voicemail on their end. They might be able to resolve the issue from their system.
3. Another option is to manually check your voicemail and listen to any existing messages. Sometimes, even if you've listened to a message, the indicator might stay on. By checking your voicemail and ensuring there are no unread messages, it might help clear the indicator.

If none of these steps work, it could be a more complex issue that might require technical support from Sonim or your mobile service provider. They should be able to provide further assistance. Let me know if there's anything else I can help with!

Because when the site was started June 2005, it was staffed by IT kids adding categories on the fly as questions were being added. You can't expect youngsters to know basic English Language. The standard of written English in questions on this website is quite frankly, appalling. I edit nearly every question I answer, and many that I don't answer. I will see if I can get it changed. I have requested it and our other Admin said he also wondered why?..

Usually pressing the mode button will toggle between modes.

The flashing light is telling you someone has left you a message.https://www.google.com/search?q=Benchtop+10in+table+saw+05-30-13+%284002%29+manualWrong link. Edit to Addhttps://www.google.com/search?q=DSE+answering+machine+manual..

Unfortunately there is no online manual for it. Contact the maker direct. https://www.google.com/search?q=tevion+t7+manual

TEVION service

Teknihall benelux bv https://www.teknihall.be > service > tevion You can reach our service desk from 8:00 AM until 6:00 PM on weekdays, or you can write us an e-mail, without any time restrictions. When contacting us, please ... ..

This unit does not exist where we are based. The link may work better for you. Add 'manual' to the end of the search query and the maker to the beginning. All questions need 'make model (what it is)' first 3 words. https://www.google.com/search?q=XS2500+answering+system ..

This is a very standard wired Desk Phone with Caller ID. It does not have an Answerphone. Your Message Waiting is with your Telco Telephone Service Provider. Phone then and ask the procedure for checking your messages. I doubt this basic phone has Call Forwarding UNLESS is is part of an office system with an Exchange Control Box. As a home phone bought from a secondhand shop, it is very basic. https://www.ebay.com/p/5044703761 ..

Try this:

DX-80 Time Change Instructions

Software Revision F32 and later

From the attendant station or an phone with attendant password:

1. Press Feature #0 from the telephone dialpad. You will be prompted to enter the Tenant Group

number. This is typically 1, however it can be set for Tenant Group 1-3.

2. Press Save and enter in the attendant password (default is 9999), then press Show.

3. Press the Next option until the display prompts you for the System Time. Press Show.

4. The last 2 digits of the year will be displayed. If you do not need to change the year, press Next. If

you need to change this value, press Chg, enter in two digits for the year and press Save then Next.

5. The current month setting will be displayed. If you do not need to change the month, press Next. If

you need to change this value, press Chg to cycle through the 12 months. When you reach the

appropriate setting, press Next.

6. The display will show the currently programmed day of the month. If you do not need to change the

date, press Next. If you need to change this value, press Chg, enter in two digits for the date and

press Save then Next.

7. The day of the week (Sat - Sun) will now be displayed. If you do not need to change the day, press

Next. If you need to change this value, press Chg to cycle through the days of the week. When you

reach the appropriate setting, press Next.

8. The current hour will be displayed. Press Chg and enter in two digits for the hour in military format.

Press Save and Next.

9. The display will now show the programmed minutes. If you do not need to change the minutes,

press Next. If you need to change this value, press Chg and enter in two digits for the minutes (01-

59). Press Save then Next.

10. You will be returned to the top level off System Time. To exit Attendant Administration, pres

On/Off button twice.

Software Revision F2x

From any telephone:

1. Press Feature # * and enter in your password. (Default password ########).

2. Press Show and enter 08 14.

3. Press Save then Show.

4. The option to change the Year will appear. If you do not need to change the year, press Next. If

you need to change this value, press Chg, enter in two digits for the year and press Save then Next.

5. The option to change the Month will appear. If you do not need to change the month, press Next. If

you need to change this value, press Chg, enter in two digits for the month and press Save then

Next.

6. The option to change the Day will appear. If you do not need to change the date, press Next. If you

need to change this value, press Chg, enter in two digits for the date and press Save then Next.

Printed in the USA Page 2 of 2

7. The option to change the Weekday will appear. If you do not need to change the weekday, press

Next. If you need to change this value, press Chg, to select the weekday, and press Next.

8. The option to change the Hour will appear. Press Chg and enter in two digits for the hour in

military format. Press Save then Next.

9. The option to change the Minutes will appear. Press Chg and enter in two digits for the minutes and

press Save.
10. Press the On/Off button to take the phone out of programming mode.