20 Most Recent Hotpoint 24 in. HDA3400G Built-in Dishwasher - Page 6 Questions & Answers

0helpful
2answers

Hotpoint dishwasher is not filling

Could be the pump
10/30/2018 8:15:16 PM • Hotpoint... • Answered on Oct 30, 2018
0helpful
1answer

Error A13 flashes a few minutes into wash cycle of my Hotpoint Futura dishwasher

Soap dispenser issue. Typically this is a control issue. Replace control board.
10/15/2018 8:56:24 PM • Hotpoint... • Answered on Oct 15, 2018
0helpful
1answer

My hotpoint LTB 4M116 dishwasher starts the cycle as I can hear the water start to go in. Then it beeps 4 times and does nothing.The bottom drain is full of water and stinks.

You need to start by checking the drain and drain pump. This is probably where the problem is.
8/19/2018 1:17:13 PM • Hotpoint... • Answered on Aug 19, 2018
0helpful
1answer

I filled the salt chamber on a new hotpoint ltsn 6m19 and then discover I shouldn't have. How do you empty it?

Pour water in to displace the salt, then drain the machine down
8/6/2018 9:26:27 PM • Hotpoint... • Answered on Aug 06, 2018
0helpful
1answer

Hotpoint lft114 cupboard door fitting instructions

Re. your letter from F.C. about the boyfriend leaving lids off (20 February), I have a similar problem. My husband has developed the habit of leaving all doors, drawers and cupboards open. I don't want to nag, because he gets ratty when I do. I don't think I can scatter insects in all the drawers and cupboards. We are 75 and 79. Any suggestions other than an old people's home?
7/31/2018 6:30:57 AM • Hotpoint... • Answered on Jul 31, 2018
0helpful
1answer

Why won't my hotpoint dishwasher draing the water?

Are we talking a lot or a little? If the unit is not draining at all then there might be something stuck in the drain pump impellor stopping it from turning at all, or stopping it running as quickly as it should so doesn't drain all the water. Is the drain outlet too high? This can cause the drain pump to struggle to reach the head height, also, water can run back from the drain pipework if blockage or height too high
5/27/2018 7:36:03 PM • Hotpoint... • Answered on May 27, 2018
0helpful
1answer
0helpful
1answer

My Hotpoint dishwasher won't drain. What can I do? HDA 3740 Go2SA are the numbers on it

Look for the fill float on a corner of the unit. Does it move freely? Is it waterlogged? This signals filled and empty depending where in the cycle it is.
3/13/2018 12:19:35 AM • Hotpoint... • Answered on Mar 13, 2018
0helpful
1answer

My Hotpoint Dishwasher won't drain. It has about 2-3 of water in bottom. What can I do?

A rug cleaner or a wet dry vac are excellent choices to empty water from a dishwasher. Look at the float like device that is on a corner of the unit. Does it move freely up and down? Is it waterlogged? Carefully clean the shaft if you can reach it, otherwise move it up and down to clear the shaft. You should also hear a faint click at either end of travel. One for full and the other for empty (On drain).
3/13/2018 12:18:28 AM • Hotpoint... • Answered on Mar 13, 2018
0helpful
1answer

Hi I have a hotpoint dishwasher LFT228a and it is flashing a number 8 what does this mean please, have cleaned all the filters and topped up with salt , help ?!

have Hotpoint LFT228A with an Error Code 8 After the Unfortunately, it appears from the web link above that a faulty part needs to be identified and replaced by a technician.
2/16/2018 11:35:24 AM • Hotpoint... • Answered on Feb 16, 2018
0helpful
1answer

HOT[PONT FWD8O DISHWASHER. SHOWS DEMO ON

If the machine switched to demo by itself, you may have a software issue and will need a new board. Try calling Hotpoint as they will be aware of the problem. Some boards can be re-programmed, but I guess they will just replace it. Electrolux had exactly the same issue a while ago. If YOU accidentally turned on demo, Deactivate Power Off at the mains. Now press and hold the On/Off button together with the Start/Cancel button. While pressing, power up the appliance at the mains. Keep the buttons pressed down until 'D off' appears in the display.
2/4/2018 5:54:36 AM • Hotpoint... • Answered on Feb 04, 2018
0helpful
1answer

I have a hotpoint slimline de luxe dishwasher

Are the spray arms turning? check for blocked jets at the very end of the spray arms, blocked with food deposits or paper from lids, or fruit pips etc. Or may be vanes on wash pump rotor have stripped off because a piece of broken glass or pot has found its way into the pump chamber - that might account for the funny noise. If the vanes have stripped off, the motor may well turn but too fast, and not pump. sometimes you can remove the internal filters and covers to examine the pump rotor - otherwise remove the pump assembly completely and check. Not a job for the faint hearted on this model lol isolate supply and remove plug first.
2/4/2018 5:30:59 AM • Hotpoint... • Answered on Feb 04, 2018
0helpful
1answer

Hi, I have a fairly old hotpoint fdw80 dishwasher and think the thermal fuse has gone but i can't locate it in order to check if that is the issue or not. any help would really be appreciated. Thanks

They are often part of the element, so check for resistance in the element and this should tell you if gone or not. It might be worth checking if parts are still available for your model, as you say It is an older model
1/9/2018 9:29:13 PM • Hotpoint... • Answered on Jan 09, 2018
0answers

Foot broken

Be the first to answer 12/18/2017 9:57:05 AM • Hotpoint... • Posted on Dec 18, 2017Be the first to answer
0answers

BFI 620

Be the first to answer 11/23/2017 5:39:03 PM • Hotpoint... • Posted on Nov 23, 2017Be the first to answer
0helpful
1answer

I have an older hotpoint americana dishwasher. It

Possibly not getting sufficient amount of water. Faulty water valve would cause that
11/3/2017 10:38:32 PM • Hotpoint... • Answered on Nov 03, 2017
0helpful
1answer

My diswasher has alot of water in it after we run

Hi
Dishwasher not draining issue usually occurs due to kinked drain pipe, clogged drain filter or drain pump. First make sure that the drain is not clogged and remove clogs if present. If no visible lint is present then remove the lower front access panel to check the drain filter and drain pump for any clogs, you'll need to clean the drain filter and drain pump completely. Also, check for any food pieces stuck near the pump impeller & clean the chopper assembly. Please note that dishwashers don't drain out the complete water such that heating element doesn't overheat. Hope this helps... Please post back for any further assistance.
Daniel

10/19/2017 1:59:26 AM • Hotpoint... • Answered on Oct 19, 2017
Not finding what you are looking for?
Hotpoint 24 in. HDA3400G Built-in Dishwasher Logo

118 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hotpoint Dishwashers

  • Hotpoint Dishwashers

Most Popular Question

drain not clogged or blocked line

  • Dishwashers
Loading...