20 Most Recent
Brother MFC-8440 All-In-One Laser Printer - Page 9 Questions & Answers
I have a brother mfc-8440
I would try to plug a regular phone in the jack to see if you are getting a clear signal/dial tone to the machine, if not, you may need to have the phone company come check it out.
Pls Clean Drum
The drum is the larger plastic unit that slides out an the toner cartridge fits into it. The corona wire is the very fine wire at the front top of the drum. Just slide the little cleaning tab back and forth.
Hello, I have Brother printer
It's possible there is still a very small scrap of paper left. If you have a can of air blow it in and try to dislodge it. If that doesn't work try to unplug it wait a minute and plug back it.
Paper Jam
sometimes the paper gets jam internally if the small piece of paper is just not letting the gears to move fluently this problem cad occur.for resolving this the whole printer needs to be opened and cleaned part by part.
but sometimes unplugging the printer from the main power outlet for sometime the replugging it again resolves the problem.
Paper jam
Very frustrating ... checked all over for remaining jams - but the message "paper jam" just won't go away after clearing a paper jam. Eventually, it goes away but no way to predict how long it will take!
Toner drive won't turn new toner cartridge
The TN-570's work equally well as the 540's so that's not the problem. The ink is incredibly fluid in its dry powder form and wouldn't make turning with the torque ratio in the machine even notice a difference. Double check that you have the right number replacements and if refilled from an outside source I'd bet its either wrong ones or bad copies. Best to you.
Brother MFC 8440
I fixed my door with Gorilla Glue (any epoxy will do.) Find the broken piece and splice together. You CAN do it!
Low toner/toner empty
Toner cartridges have more then just "toner ink" they also have developer and sometimes a chip that says how many times the cartridge has been used.
Also some refill places can be a bit dodgy so I know it might not seem like the best thing right now but try buying a real replacement cartridge and if that doesn't do it beg and plead to return it saying it was the wrong model.
If it does fix it then you might have a bad cartridge that either has the "chip" or the cartridge itself is simply worn out and in need of developer as well.
I have a brother MFC 8440
Have you checked the back paper door?, the paper tray?, and the drum/toner unit? If a paper was torn out of the machine, you may not be able to see the piece that is still triggering the jam signal. You can also pull down the paper guide around the orange fuser roller through the back door by pulling it gently to the left.
Users manual
Here ya go
http://welcome.solutions.brother.com/bsc/public/us/us/en/doc/manual_index.html?reg=us&c=us&lang=en&prod=mfc8440_all&type2=-1&flang=all&dlid=
Adf hinge for mfc 8440 where to buy
Very common fault most Brother dealers carry this item, any service agent should stock, ring brother and ask details of your nearest printer agent.
Not finding what you are looking for?