The red triangle flashing on your Defy DFF417 refrigerator indicates a fault or error. Here are a few steps you can take to troubleshoot the issue:
Check the temperature: Ensure that the temperature inside the fridge and freezer compartments are set to the correct levels. The ideal temperature range for the fridge is between 2°C and 8°C, and for the freezer, it is -18°C.
Check the door seal: Make sure the door seals are clean and not damaged. A damaged seal can cause warm air to enter the fridge, causing the temperature to rise.
Check the fan: If the fan is not working correctly, it can cause temperature issues. Make sure that the fan is spinning freely and is not obstructed.
Check the condenser coils: Dirty condenser coils can also cause temperature issues. Make sure the coils are clean and not obstructed.
If none of the above steps resolve the issue, it could be a more serious problem that requires professional assistance. Contact a qualified technician to diagnose and repair the issue.
All questions need full 'make model (what it is)' please.
Do you have a freezer at the top and a fridge below it? That box is just a cold air vent from the freezer. There is often a circulating fan in there, but it could be elsewhere.
The issue with a warm fridge and a cold freezer is that the defrost for the freezer has failed and the evaporator is a solid lump of ice and not passing chilled air, OR, the vent is boked with ice. The is a defrost timer and a heater element at the rear of the freezer back panel.
If the refrigerator freezer is cold but the refrigerator is warm, the defrost thermostat might be defective. Several times a day the defrost heater turns on for a few minutes to melt away any frost that may have accumulated on the evaporator coils.Mar 3, 2015
Question edited for a lot more clarity and for spelling.
Question moved from Super computers category.
Are you sure it it a refrigerator and a refrigerated AC unit?
Super General AC error code e5
"E5" - Fan Motor Problem: Occurs when the over current from the fan motor is detected. Solution: Verify Power (Voltage/Amps).
Tammy,This symbol is of a dotted square with a water droplet forming at the bottom.Your water filter should be changed every six months based on average use.Here's a list of symbols FYI....https://www.domex-uk.co.uk/help-advice/samsung-fridge-freezer-symbols/
EMER position. Alternately displays current time and temperature. the HOLD mode. HOLD is displayed flashing when the thermostat is in a temporary HOLD Mode
To reset the panel on your Russell Hobbs fridge, unplug the fridge from the power outlet and leave it unplugged for at least 10 minutes. Then plug it back in and the panel should reset itself. If the panel still displays the EC alarm, you may need to contact a qualified service technician for further assistance.
Question moved from Misc to Refrigerators category.
All question need FULL 'make model (what it is)', or it is all guesswork. It appears to be a Frigidaire model of some type.
Frigidaire Refrigerator Error Code 5y CF - Condition = Communications failure at power up
https://www.google.com/search?q=5Y+CF+on+my+fridge
With the light, there are two types of bulb replacement and each model has their own way to get to them, so once again, the model number is needed. Everything can be found online
https://www.google.com/search?q=frigidaire+refrigerator+light+replacement
....
It seems that you're referring to an issue with the DIM32D2BSSPR Ice Maker model. When the unit goes through several cycles, it shuts down and the three size selector lights start flashing. Holding down the power button allows you to reset the unit and resume its operation.
Based on the provided information, it appears that there may be a malfunction or error occurring within the ice maker. Here are a few steps you can try to troubleshoot the issue:
1. Check the power supply: Ensure that the ice maker is properly connected to a stable power source. Verify that the power cord is securely plugged in and there are no loose connections.
2. Clean the unit: Ice makers can sometimes experience issues due to debris or mineral buildup. Clean the ice maker thoroughly, including the ice bin, water supply lines, and any filters or screens. Follow the manufacturer's instructions for cleaning and maintenance.
3. Reset the unit: As you mentioned, holding down the power button allows you to reset the ice maker and get it working again. If the issue persists, try performing a factory reset if your model supports it. Refer to the user manual for instructions on how to reset the unit.
4. Contact customer support: If the problem continues to occur despite your troubleshooting efforts, it's recommended to reach out to the manufacturer's customer support or service center. They can provide further assistance, troubleshoot the issue over the phone, or recommend a professional repair service if necessary.
Remember to consult the user manual specific to your model for any additional troubleshooting steps or guidance provided by the manufacturer.
did you try reset your Norcold RV refrigerator? all you need to do is unplug the power cord from the unit. Then, wait for five to ten minutes and then put it back in.
There is another possibility... It is likely trying to use more power than what is available which is why the lights are flashing.
