20 Most Recent Hotpoint Aquarius WD640 Front Load Washer/Dryer - Page 7 Questions & Answers

This has happend to me today! this is the fix

1. Press and hold the Start/Cancel button until message clears
2. Now press both Start/Cancel and On/Off buttons together until you get a dOFF message
3. now your machine should work OK

Could be a faulty thermostat switch.

Sounds like you may have a short in a wire. I would open the unit and take a look. You may want to also open it and run it to see if you can track it down.

Where is filter on Hotpoint Aquarius WD420

your brushes on your motor might need replacing,, thats what it sounds like.

No date on this that I can find. Can you move the dial to a different setting? If so, just move it a fraction to see if it will engage. If it does engage, then you will need a new timer, goes under the dial. If it is a computer panel, try resetting it on another load setting and put it on the final spin.

Godd luck

According to this: http://www.hotpointservice.co.uk/hs/pages/content.do?keys=FAQ:ERROR_CODES , it looks like you need to schedule a service appointment to fix it...good luck! :)