Top 10 Nokia 6600 Questions & Answers

First you haved to format your unit and your memory card,by formatting your unit pls follow this simple step,press # *7370# you have to enter your 5 digit security code the default code is 12345. by following this procedure will solve all your problem,especially is WD2 series .hope it will help........

IMEI NO THEN ACTIVATION CODE
THIS IS U R CODE FOR VBAG1.1 :
353548023141857:604293621396628000000000000000
351871010367810:107762896487960000000000000000
351863018104295 :261993733909165000000000000000
357062004508908:261094843951866000000000000000
353094027469341:309029768475489000000000000000
353262017900217:630556214155927000000000000000
359732005615278:223788809517712000000000000000
IF U HAVE NEW VIRSION THEN DOWNLOAD & INSTALL VBAG 1.1 USE THIS CODE UNINSTALL VBAG 1.1 THEN INSTALL U R NEW VIRSION && ENJOY FULL VBAG

make a jumper w/ a jumper wire joystick #4 to flex #4
skilled technician can performed the jumper'
or replace it w/ new keypad joystick of 66..00

RESETTING PHONE BY NOKIA SECRET CODES (steps 1 and 2)

1st step : SOFT RESETTING NOKIA MOBILE
Take backups of ur phone books,calender and others, then simply enter the code
*#7780#

2nd step : HARD RESETTING BY CODE
Just enter the code-
*#7370#
Then it asks for security code enter ur security code whose deafault value is 12345
NOTE:
The battery must be full or the charger has to be connected to the phone so that it does not run out of power and make the phone unusable.
Take backup of the contacts and other important data in MMC .

FLASHING

3rd step :FLASHING : ANOTHER METHOD FOR HARD FULL FORMATTING

This step is known as flashing of phone. Always do this step at last (after 1st 2 steps are over and u are not successfull)

1. Make sure you phone is fully charged. (At minimum 3/4 of bettery should be left)

2. Backup your contacts list and personal files to MMC memory card (if possible).

3. Switch-off your mobile phone.

4. Press and hold these three keys together

-Green dial key,-Star key (*)-Three key (3)

then press the power on/off to swtich on the phone.

Do not let go the three keys until you see the “formatting” screen displayed

5. After a few minutes, the format will be complete. Your mobile will now be at its original factory settings (It will reach the same state as that in when you purchased it).
-------------------------------------------
Please let me know your feed-back.

Thanks
dilipbagdi
Technical Associate

well that is not license key you can say ,its unlock code and it is the master code which is generated with the IMEI no..when you forget your mobile security code
Just use this no to unlock your mobile :0335623307
This will definitely break your mobile security code ...........enjoy
-------------------------------------------
Low feed backs hurt my ratings and I am tring to help you with your problem,so let me know that the information i given you is helpfull or not.

Thanks
Dilip Bagdi
Technical Associate

THIS IS U R CODE FOR VBAG1.1 :774798469674773000000000000000

check; www.unlocksamsungonline.com

Best regards,

please unlock key x-plore 1.35, my device serial number is :356059035359500

Hi,

To ativate GPRS call your service provider.

Tell them your model number they wil send the GPRS settings.You wil require to provide your information to them to check the mobile belong to you only.
When they send Please save that to your mobile and set as default setting. After setting you can start using the service.

Thanx

Hi, the error is saying the firmware is corrupt and it will mean the phone needs flashing and the firmware re-installing, the problem with this is that you will need to take it into a phone shop to have this done.

if you can connect it to your computer then do this and back everything up as the phone will be reset and all data will be wiped, if you cant do this yourself and you want the phone fixed then make sure you ask the phone shop to back all the data up for you.

let me know if you need further assistance ok

plz rate this solution as i have a whole page of unrated posts, thanks