20 Most Recent E-Machines eMachines Monitor E15T4 - Page 2 Questions & Answers

WHEN STARTING WINDOWS PRESS F8 KEY AND START PC IN SAFE MODE.. THEN CHANGE DISPLAY MODE TO 800BY 600 RESOLUTION

Check the monitor settings in the control panel. You could have the red turned way down or everything else turned way up. If it isn't that, your monitor probably lost the red driver.

If you have another computer handy....hook the monitor up to it to see if the problem remains, if it does not you might want to focus on the video card.

tried to make an adjustment in the settings let see if you can get good screen display. if you adjust in maximum brightness settings then its like no change, it could be a back light issue.

does the power indicator turns from green to red then does it blinks?.

Check this link-it will have all the answers for your e-machine. BUT I believe the display control is on the top row of your keyboard (light icon)ftp://ftp.emachines.com/notebook/E725/Manual/eM_HM50_MV_Eng_QG_0223.pdf

Hi,

• Push and hold the power button for 10 secs.
• Then turn on and keep tap F8 key.
• there you select last know good configuration.
• It will take you to destop.

Please rate me!! Thanks, SF

You may have a bad pixel, unplug and disconnect video cable, now press and hold power for 2 minutes. Now plug everything back in place and start monitor, is dot is gone ? if yes! there was a static charge that caused the dot to appear, but if there was no change! you have a dead pixel no remedy.

What type of connection does it have?

• Attach two monitor and switch on the laptop
• automatically second monitor will show diplay
• if not then find out dual display symbol on the taskbar click on it.
• window will open select dual monitor
• click apply
• if not then right click on desktop --properties--desktop two monitors symbol will see select 2nd monitor

under control panel,in display, look for display settings

Click start control panel administration tools computer management device manager scroll to display adapters + to expand you might see a yellow question mark ? or exclamation mark ! or a red x right click select reinstall drivers you might have to remove your graphics card to make sure the socket is clean restart your computer the reinstall it this should activate found new hardware wizard if your computer came with a mother board disk the drivers could be on it click start control panel,display,desktop you can select a different desktop from the drop down list or a browse button where you can select different pictures this may vary depending on your operating system also you can change the settings for more or less pixels or from the drop down list pick the appropriate level of color range or troubleshoot also select advanced then general dpi normal size,larger size or custom settingsalways click APPLY after making any changes hope this helps you

have you tried a software update for the video drivers?

Go to Control Panel - Display - Settings tab, then move the Screen Resolution Slider to change the screen resolution.

Hello laurences467,

Welcome, and thank you for using FixYa!

Your issue is the Power Supply Board. I repair ALOT of these by changing out bad Capacitors on the board.
Since you will not be able to find one of these, repaired already (refurbished board); it will be cheaper, in your case, to replace the monitor.
Your local, WalMart/Best Buy/Staples/Office Max all can give you some good price comparisons.

Have a great day!