20 Most Recent
Hotpoint RB757 Electric Kitchen Range - Page 6 Questions & Answers
Self cleaning hotpoint stove
Sometimes in self clean it can burn out the element. Need to check the element with an ohm meter and see if it shows resistance. If it shows open then the element is bad. If it shows resistance then the element is ok. Next see if you are getting 220 volts to the element when in bake mode. If you are not getting 220 volts then the control is bad.
Hotpoint RB757 Electric Kitchen Range
check you outlet make sure it has 240 volts coming out. it might be your house breaker 1 side bad it is a breaker with 2 points in it 1 side will work and give you 120 volts but the other side is burned out you need both points in contact to give you 240 volts good luck and make sure you use a volt tester you can buy at any hardware
Buttons melting on the bd42 hotpoint
The same thing happened to my Hotpoint cooker and they replaced it. It happened to the replacement product also. Now they don't want to speak to me. DO NOT BUY HOTPOINT/ whirlpool products. They are very unprofessional . Please don't buy their products. You will regret it
How to stop the beeping and sign. Of bad line on a Hotpoint stove
If your Hotpoint stove is beeping and displaying a "bad line" error, it could be indicating a problem with the electrical connection to the stove. Here are some things you can try to stop the beeping and resolve the error:
- Check the power cord for any damage or fraying. If the cord is damaged, it should be replaced.
- Make sure that the electrical outlet is functioning properly. Test it with another appliance to ensure that it is providing power.
- Check the circuit breaker or fuse for the stove. Make sure that it has not tripped or blown.
- Make sure that the stove is properly grounded. This may require a professional electrician.
- If the error message continues to appear, the problem might be with the stove's internal wiring and it would be best to contact a Hotpoint service agent, who can inspect the stove and determine the cause of the problem.
Not finding what you are looking for?