20 Most Recent JVC Everio GZ-MG30 Camcorder - Page 2 Questions & Answers

Use http://www.downloadvideos-convert.com/download-videos-music

1. Download Video Download Studio, install it.

2. Go to the interface, you can download (Automatic capture) the YouTube video there directly. Tab Download to Convert, you can also click "Add" button to upload the videos from computer. You can also edit video by trim and crop functions.

3. After the video display on the Video Download Studio, click "Profile" and choose "General video", then select an MP4 format. Set destination file, clicking Convert button to complete the task.

Not only convert video to MP4, but also support batch conversion. Safe and easy to operate. No Viruses, No Spyware, No Adware. Do not hesitate. Have a try!

This problem usually show when your unit has detected a problem with your HDD and that's why you also hear that noise when you power it on , the way to correct this is to have the HDD replace, you can purchase a replacement HDD from a service center or better yet take it there for the replacement.

http://www.erightsoft.com/SUPER.html

use their free converter, i've been using it ever since i needed to convert files for my picky nokia 770. personally i convert the .mod files into .avi, and .mp3 (since premiere doesn't recognize the audio as an .avi) its pretty straightforward on how to set it, it even comes with its own codecs

Another solution is to make sure you are using the usb cable that came with the camera. For some reason, if I use any other, the computer won't recognize the camera. It's the one with the magnet. In fact, mine has two magnets on it.

I think it's low lighting that's giving you the problem. A lot of cameras and camcorders have this problem. They just can't focus correctly in low light situations. Getting more light on the subject will help solve this problem. Just like our eyes, they need light to "see" clearly.

This problem usually occur when the camera is running whilst the lens cap is put on. Try to turn off the camera and remove the battery pack for a couple of hours and then put it back and turn the camera on. If this does not work, try to reset your camera back to factory defaults. Please let me know if this works.

Hi,

You can download the owners manual by clicking this link

• You'll require Adobe PDF Reader installed on your computer to view this manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa

Sorry, I'm not expose to mac. Anyway for a quick check, you may explore on how to rename the file, ex. MOV001A.MOD to MOV001A.mpg. It works with windows. Be sure to have back up since this process is e reversible. Good luck

This model can not support external mic. You have no choice but to use internal mic. Hope it helps

IF there is a hard drive in the unit you may be able to remove that and hook it up to a PC via a USB to hard Drive adapter, then remove the data with that use a program called unstopable copier. link below.
www.roadkil.net

If your model is a GZ-MG30US you'll find manuals here:
http://books.jvc.com/booklist.asp?Model=GZ-MG30US

This site may also give you other updates

It might just want a software update, have a look here http://www.jvc-victor.co.jp/english/download/index.html see if there is an update for your model

Hey

if you didn't empty the camcorder then they all should still be in there, just download them again, if you formatted or emptied the camcorder then you need to use a data recovery software like filescavenger to recover http://www.quetek.com/prod02.htm please use the free trial to scan and see if it finds the files.

Then you can recover those files to your computers hard drive. note that the content is lost if you record new video on top of the old ones, and will not be recoverable.

also if the camcorder is used to take pictures or recordings after it was emptied the new content would overwrite the old content and it would not be recoverable or partly un usable.

1st of all can you play the movie on your computer? If not, you are probably missing the programs and drivers necessary to do anything with the AVI file.
Videos on the computer generally run with avi or mpeg files. You have to have the drivers to play these files before you can run them.... otherwise, there should be no reason why they don't run.

the battery of camcorder is not working properly.get the battery replaced or take it to service workshop for detailed check up of inner circuitry.

I'm an English guy with the same problem... What you do is keep the power on for a long time, or you charge it up with the charger. Trust me. However, it is very rare for this to occur. There should be a message saying: "Temperature is too low, keep power on." There should be another message reading: "Turn off power and turn on again to check if camera is fully-functional. Thanks for giving me something to do while X-Plane downloads on my Mac OS X.

Your battery has developed a memory. This is common with electroncs, laptops, cell phones, and yes cameras! You will need to replace your battery. To get the most from your new battery, fully charge before using the camera. Do not re-charge until the battery is all but dead, then fully charge before using. Always do it this way and you will get optimum life expectancy from your devices. Unfortunately, we tend to re-charge prematurely and even use devices while charging...which is ok, but when we do not fully charge, or we plug in before the dying end, the battery begins to develop a memory and thinks it doesn't need as much charge until eventually, the device will not work unless plugged in. Good Luck. I hope this is helpful.

UR HDD IS NOT SUPPORTING THE CAMCORD I THINK ANY CONNECTION GET LOOSE GIVE THAT FOR REPAIR....

You can download one from JVC at the following link

http://www.jvc.co.uk/files/instruction_manual/lyt1472-001c.pdf