Top 20
Hotpoint RVM1325WW Microwave Oven - Page 3 Questions & Answers
How to remove RVM43003
You can
download GE
owner's manuals and installation instructions
here.You can find
helpful exploded view diagrams and order parts by entering your full
model number from the tag on the oven here.
We're happy
to help you with free advice and we'd appreciate your thoughtful rating
of our answer.
1/16/2013 8:19:29 AM •
Hotpoint...
•
102 views • 0 helpful votes
Hotpoing microwave
use the logically, clearly, fix it .God bless youa stuck key or non-responsive key, most of the time you will have to
replace the keypad for this microwave oven repair. If your keypad is
connected to your control board by a flat ribbon wire, try disconnecting
it and clean the silver contacts with an ordinary pencil eraser. After
cleaning, plug it back in and try it. If it doesn't fix it, replace
the keypad unit. Some units actually have keypad tests to confirm your
diagnosis of a bad key.If your keypad and control is the same
unit, replace that unit. Another note, unlike stove/oven keypads and
controls, most microwaves do not have error codes or tests to
distinguish whether it is truely the keypad or control. Most of the
time, it is the keypad that needs replacing, but a small percentage of
the time it can be the control. Check the tech sheet if they can point
you to the right part.
8/2/2012 10:39:53 AM •
Hotpoint...
•
147 views • 0 helpful votes
Microwave keypad dont work
The problem is in the keypad control board, cost will run high making a new microwave oven attractive.
4/6/2012 2:56:33 PM •
Hotpoint...
•
290 views • 1 helpful votes
Microwave control sparked
There is a major short in the keypad control board, this may be a good time to consider a new microwave oven. The parts and service call will easily cost more than a new one.
6/24/2012 3:02:28 PM •
Hotpoint...
•
26 views • 0 helpful votes
Keep getting error code a8 on hotpoint fdd912
If the error code is not addressed in your owner's manual then it should be addressed in the technical sheet, which will be hidden behind the back or behind the controls.
You can download GE
owner's manuals and installation instructions here.You can find helpful
exploded view diagrams and order parts by entering your full model
number here.
We're
happy to help you with free advice and we'd appreciate your thoughtful
rating of our answer.
12/15/2011 7:05:42 PM •
Hotpoint...
•
406 views • 1 helpful votes
Manual for hotpoint 6671 microwave
You directed this question at me, but unfortunately I'm unable to provide you with a real solution at this time. FixYa has discontinued direct questions, so if you would care to repost your question, the repost will be visible to all members of the FixYa community. Hopefully one of them will be able to provide you with a real solution.Thank you for using FixYa.
1/9/2012 12:20:53 PM •
Hotpoint...
•
52 views • 0 helpful votes
Pressing the time buttons does not start the
Since the timer works it means that the defect is in the magnetron or its power source. They can be replaced, but only by a repairman: because of the extremely high tension (over 5,000 volts) specially insulated tools must be used.
A new magnetron will cost around $125, the labor to install it another $100. If you can buy a new oven for less than $400 then it's time to junk this one, it's not cost effective to put so much money to fix a really used one.
8/31/2011 8:10:45 PM •
Hotpoint...
•
137 views • 1 helpful votes
I have a Hot Point
This is likely the CHILD LOCK feature of your microwave whish is engaged.
Try holding down the CLEAR / OFF button or the RESET button for 5 seconds in order to disable it.
Since you did not provide a model number, you will have to check your own User's Manual for the exact detailed instructions if required.
Good luck.
4/23/2011 8:01:04 PM •
Hotpoint...
•
281 views • 0 helpful votes
Hi. I have a hotpoint
The oven is tripping the circuit because it is pulling to many amps.
Best thing to do is get an electrician to install a larger amp circuit for you. This will fix the problem and should be cheaper than another stove.
3/27/2011 8:20:57 PM •
Hotpoint...
•
417 views • 1 helpful votes
While cooking popcorn lastnight in
All that is required to crack/break an item that is microwave safe is a fine crack or deep scratch. Water will expand so quickly as the microwave energy heats up the water, it turns to steam and cracks the plate with the pressure build up.
3/21/2011 3:13:22 PM •
Hotpoint...
•
287 views • 0 helpful votes
I would like instructions on
Most major manufacturers supply manuals
online so if you were to log on to the manufacturer's web site, you
may be pleasantly surprised as usually, if available, one is able to
download, by model number, Customer
Instruction Manuals, Dealer
Network for spare part supplies as
required.
The information is normally free of
charge.
I hope this helps.
3/29/2011 9:15:24 AM •
Hotpoint...
•
199 views • 0 helpful votes
Not finding what you are looking for?