20 Most Recent Hotpoint RVM1325WW Microwave Oven - Page 9 Questions & Answers

Many thing can do this but, common things are....loose high voltage wire.....poor solder joint on board.....magnetron.....power relay.....

check out the users manual http://www.rgsservices.com/images/appliance/RVM1435WD.pdf that will guide you on how to do that

You can download GE owner's manuals and installation instructions here.

Otherwise, GE Customer Service is here and they can point you to the proper manual.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

If it went dead almost immediately after pressing the Start pad, that's usually a shorted high-voltage capacitor.

If it went dead a few seconds after pressing the Start pad, that's usually a failing high-voltage transformer.

GE / Hotpoint models usually have about a 2-second delay between the time you hit Start and the time the high voltage section turns on.

Here are some links you or someone you know can use for test help, but read their safety warnings first:

http://www.gallawa.com/microtech/cap_test.html
http://www.gallawa.com/microtech/xformer.html

You can usually find helpful exploded view diagrams and order parts by entering your full model number here: http://tinyurl.com/gv383

There should also be a "mini-manual" hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting & testing.

We're happy to help and we appreciate your thoughtful rating of our answer.

There may be a fuse either inside the bottom cover or the back cover.

I need it too.

We need just a bit more info from you please in order to possibly help you.


Model number of your steamer please. I understand the brand is TEFAL

I could pick one and give you the manual link but I don't think it would be the manual your looking for. Just being honest. Help us help you.

Thanks

Kelly

I am going to give this a shot. There are 4 Tefal steamer manuals here. Hopefully this link has your manual.

http://www.tefal.com/Consumer+service/Use+instructions/Home+Use+Instructions.htm?DdlFamily=%7B0A36B0FA-0D32-4C91-A92C-C08C22E135AD%7D

Microwaves generally last about 2000 hours before losing power. Here are some basics to try: Make sure the power plug is securely plugged into the wall outlet. Listen for an audible click when you close the door. Unplug it, wait 30 seconds, plug it back in (this may reset it). If the start button is then not appearing, there may be a problem with the touchhpad or control panel. Teka's customer service: https://www.teka.com/global/support/

Request the manual directly from Mandine or the supplier.

This is not a North American make. Try the link https://www.google.com/search?q=amstar+1000+dgss+microwave+manual ..

They are usually at the rear where the power lead goes in. This will state the maker, the address, the voltage and watts, the model number and serial number. That is a statutory requirement. In some circumstances they are in the door frame rebate but not so common where heat is involved. https://www.google.com/search?q=galanz+microwave+air+fryer+serial+number+location ..

C4_line microwave oven wich country brand

Based on the fact it is not said where it is used or how it blows i.e. does it blow as soon as power is applied or does it blow after a few seconds? In the first case you probably looking for direct short while in the second case a faulty item that is becoming defective when energized or hot.

It is not an appliance that we know here. See how this link works for you? https://www.google.com/search?q=Cuisine+Select+EW1211D+user+manual ..

You have a defective control panel (contains keyboard), it would be cheaper to just replace the oven.

this oven could be in display mode this only allows non harmful functions to work eg lights etc but no heat this can be disabled through clock test prog reset but you will need an engineer to do it as complicated.

ring 08705 678910 for service and advise

good luck

I have the same problem now its the second time it got stuck. The manuals say not much. :(