Canon MVX20I Mini DV Digital Camcorder - Answered Questions & Fixed issues

Time for a new camcorder, you can't get parts, they do not sell to the public.

If your battery does not seem to charge, then you need to carry out some tests on the device, the battery and the charger. First you insert the battery into another cam corder then you try to charge, if it charges, then it means the battery is okay and if it does not charge, then it means the battery is bad and need to be replaced. Then i will advice you take the charger and try to charge another device to see if it will work, if it works, then it means the charger is alright but if it does not then it means the charger is bad and need to be replaced. Finally, test the camcorder by plugging a well tested charger and battery into it and trying to charge it, if it does not charge then the problem is from the camcorder.

I had this problem on this camera. I found the battery removal rechnique seemed to work for only a short while, then the problem would come back repeatedly. I looked into just buying a new one but when I explained the problem to a salesman in an independent camera shop, he asked me if I'd just tried hitting the top of the camera. Apparently the motor sometimes gets stuck. Since the camera was virtually useless I tried this (hit it 2 or 3 times quite firmly, near the lens and by the accessory shoe). Now it zooms in and out perfectly and so far hasn't reverted to its problem state.

Must try to give the camera shop some other business - maybe when I buy a new stills camera

easy...
do not plug in your camera while you connect it with computer

If you suspect that your JVC camcorder may have been damaged by plugging in the wrong power cord, it's possible that the cassette mechanism may not release as intended. However, you can try the following steps to manually release the cassette:

1. Turn off the camcorder: Make sure the camcorder is turned off and unplugged from any power source.
2. Locate the cassette release button: The cassette release button is usually located on the side or bottom of the camcorder near the cassette compartment. It may be labeled "eject" or have a symbol that looks like a triangle with an arrow pointing up.
3. Press the cassette release button: Press and hold the cassette release button for several seconds to see if it releases the cassette. You may need to press it firmly or use a pointed object like a pen or pencil to press it.
4. Manually release the cassette: If the cassette release button does not work, you can try manually releasing the cassette. Look for a small hole on the camcorder near the cassette compartment. This hole may be labeled "emergency release" or have a symbol that looks like a triangle with an arrow pointing down. Insert a straightened paperclip or similar object into the hole and press gently to release the cassette.

If you are unable to manually release the cassette, it's possible that the camcorder has been damaged beyond repair.

It's possible that the video head is dirty or damaged, which is preventing the camcorder from playing back tapes. You may need to clean or replace the video head. As for the "No Card" message, it may be a default message that appears when the camcorder cannot detect a tape. Check that the tape is inserted correctly and try a different tape to see if the issue persists. If the problem continues, it may be a more serious issue with the camcorder that requires professional repair.

If your Canon MV940 digital video camcorder is not charging when you plug it in, there are a few things you can check to try to determine the cause of the issue:

1. Check the power adapter: Make sure that the power adapter is securely plugged into the camcorder and that the outlet you are using is working. Also, check that the adapter is not damaged or malfunctioning.
2. Check the battery: Make sure that the battery is inserted correctly and that it is not damaged or worn out. If the battery is old or has been used for a long time, it may no longer hold a charge and will need to be replaced.
3. Check the charging port: Make sure that the charging port on the camcorder is clean and free of debris. If there is debris blocking the port, use a soft-bristled brush or a can of compressed air to clean it out.
4. Check the battery terminals: Make sure that the terminals on the battery are clean and free of debris or oxidation. Clean the terminals using a soft-bristled brush or a pencil eraser.
5. Check the firmware: If the problem persists, check to see if your camcorder's firmware is up to date. If it isn't, update it.

If you've tried all of these steps and you still cannot charge your camcorder, it's possible that there is a hardware issue with the camera. In this case, you may need to contact Canon support for further assistance. https://amzn.to/3WisSDI

1. To transfer video footage from your Canon MV830i camcorder to your Macbook, you will need a FireWire cable and a FireWire USB adapter. This cable connects the camcorder to your computer, and the adapter allows the FireWire connection to be recognized by your Macbook. You can find this cable and adapter on Amazon or other electronics retailers.
2. To transfer the footage to your computer, you can use the built-in iMovie software on your Macbook. This software lets you capture the footage from your camcorder and import it into the program for editing.
3. You can reuse the tapes by recording the footage you have already captured. Make sure you have transferred the footage to your computer before recording it.
4. Some other advice:

• Make sure your camcorder is in VCR or VTR mode before connecting it to your computer.
• Test the connection and transfer process before filming important footage.
• Check the manual of the camcorder for detailed instructions on how to transfer footage.
• Be patient; transferring footage from a camcorder to a computer can take some time.

Remember that transferring footage from a camcorder to a computer can be a bit complicated, but with some patience and practice, you'll get the hang of it. Remember always to consult the manual of the camcorder for detailed instructions and always keep your computer and software updated.

To connect your Canon ZR 800 camcorder to your MacBook Pro using a Firewire connection, you will need a Firewire cable and a Firewire port on your computer. Here are the steps you can follow to connect your camcorder to your MacBook Pro:

1. Locate the Firewire port on your MacBook Pro. It is usually located on the side or back of the computer and is marked with a symbol that looks like a small lightning bolt.
2. Connect one end of the Firewire cable to the Firewire port on your MacBook Pro.
3. Locate the Firewire port on your Canon ZR 800 camcorder. It is usually located on the side or back of the camcorder and is marked with a symbol that looks like a small lightning bolt.
4. Connect the other end of the Firewire cable to the Firewire port on your camcorder.
5. Turn on your camcorder and set it to playback mode.
6. Open the video editing software on your MacBook Pro and choose the option to import video from a Firewire device.
7. Follow the prompts in the software to import the video from your camcorder.

I hope this helps! If you have any further questions, don't hesitate to ask.

If you are experiencing color problems while recording with your Canon Vixia camcorder, there are a few steps you can try to troubleshoot the issue:

1. Make sure that the camcorder is properly focused. If the focus is off, the colors may appear distorted or blurry.
2. Check the lighting conditions. If the lighting is too dim or too bright, the colors may appear distorted or washed out.
3. Check the white balance settings on your camcorder. If the white balance is not set correctly, the colors in the video may appear inaccurate.
4. Clean the camcorder's lens to remove any dirt or smudges that may be affecting the image quality.
5. If you are using an external device, such as a monitor or TV, to view the video, make sure that it is properly calibrated.

If you have tried these steps and are still experiencing color problems with your camcorder, you may want to try contacting Canon customer service for further assistance. They will be able to provide you with more specific troubleshooting steps based on your particular camcorder and the issues you are experiencing.

Hi, Please first make sure that there is nothing within the video camera that was accidentally lodged into the space where the tape would fit. Also, please double check that you're orienting the video tape properly when inserting it into the video camera. I would also test different tapes to see if the issue is consistent. Also, you might have to rewind each tape because I think if the tape is at it's end, then it automatically leads to the tape being spit out. Thank you.

Hi, you might be able to get the camera fixed by geeksquad/Bestbuy so I would advise you to try this first before purchasing a replacement. Thank you.

eBay! $24 to $1,600. https://www.ebay.ca/b/Pal-Camcorder/11724/bn_7023398642 ..

https://www.manualslib.com/manual/683998/Canon-Vixia-Hfr40.html# See pages 104-106 of the above manual. It is also possible to search it online at the download site above using a menu item. Search for as[ect ratio to find the links to the mentioned pages.

It is listed as an antique. I don't think you are supposed to be using it. I can't even find a manual on it. https://global.canon/en/c-museum/product/8mmvc394.html I was hoping there might be two brightness settings, one for record and one for playback https://www.google.com/search?q=canon+es970+8mm+video+camcorder+manual ..

This could be caused by a lot of things. Recording tape oxidizes over time and loses its range and ability to store information. There is nothing you can do about that. Another thing could be the heads in the device being dirty or out of alignment or needing to be demagnetized.

Yes, it exists sir. It is a mini, digital video recorder.

Canon XL2 3CCD MiniDV Camcorder w/20x Optical Zoom ...

www.amazon.ca > Canon-3CCD-MiniDV-Camcorder-O...

From the Manufacturer. The Canon XL2 allows you to capture images closer to the finished product than ever before. Work that previously was limited to post- ... Rating: 4.4 · ‎28 reviews

Canon XL2 MiniDV Camcorder 9549A001 B&H Photo Video

www.bhphotovideo.com > ... > Camcorders

The Canon XL2 is the upgraded replacement model of the ground breaking XL1 camera. It is still the only prosumer camcorder to offer an interchangeable lens system. Rating: 4.5 · ‎30 reviews

Canon Xl2 Camcorder for sale ' eBay

www.ebay.ca > ... > Camcorders > Canon Xl2 Camcorder

Results 1 - 11 of 11 - Canon XL2 3CCD Digital Camcorder W/ 20x Zoom xl 5.4-108mm L IS 1:1.6-3.5 Lens. 4.5 out of 5 stars. (39) C $188.76 shipping.

Support ' Support Professional Camcorders ' XL2 ' Canon USA

www.usa.canon.com > portal > home > support > details

XL2 · Standard Definition or High Definition · Power Supply (rated) · Power Consumption (While recording AF=ON) · Television System · Video Recording system.

Probably external hd wont work. Try another sd card

https://www.youtube.com/watch?v=ClNJAESh4Ds

the cassette loading motor or the capstan motor and its shaft or head drive motor may be struck loosen with contact cleaner and give a little shake.