20 Most Recent Canon MV700 Mini DV Digital Camcorder Questions & Answers

Please refer page 118 of the manual of Cannon MV700 available from this website. http://files.canon-europe.com/files/soft24377/manual/MV690_MV700_Series_CUG_EN.pdf You can connect camcorder with Acer Aspire using a USB port and cable. But this interface only allows transfer of still images from the SD card on the camera. It will not allow video images to be transferred from the tape. Some models of Acer also have flywire interface (IEEE1394) and also SD card reader. You can use these also to download video images from the camcorder.

Hi Keith: You can check menu settigns there? Take pics/videos and this appears black in the pc monitor after transference or download pics/videos? If your answer is yes, dont sound like a LCD problem.The other choice, could be a malfunctioning CCD (Charge Coupled Device) image sensor... in both cases (LCD or CCD) this isn't a job that you could solve yourself; this wrong include distorted images or abnormal colors, scratchy purple lines, blank or black pictures, and/or black videos with good sound being recorded on the camera's flash card. I suggest check this link for additional details in this previous solutions for an Defective CCD and next contact your Samsung service. I strongly suggest (taking into consideration the age of your camera) to evaluate the cost of repair versus the cost of a new camera with similar features, before making a final desicion.Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.Thank you for using Fixya, and have a nice day.

You may need to install the drive for it first. Go to the manufacturers web page and see if they have any softwear for your camcorder. Install it, then open up the program, plug in your camcorder, turn it on, wait till it (computer or softwear) recognizes it and see if you can do it using the softwear you just installed.

Obviously you need to check and read your users manual.
There are many icons that can indicate a certain condition;
and nobody can answer your question anyway due to lack of information

Hi Ron - You just need to connect the camera to the Mac firewire port and load the Mac Imovie software which will let you load the video to your machine.

To get any of the Canon software you can download it from their website HERE

Happy Viewing and thanks for using Fix Ya

Mikeywaf

Look for a small door on the left side of the camera near the back, open it.

Al

Hi,

You can download and print the instruction manual in PDF format by clicking this link

Please note: Adobe PDF Reader is required to view this manual. Click here to download the latest version of Adobe Reader

Thanks for using FixYa

same problem :(

This is usually caused by a defective CCD image sensor and can be repaired fairly inexpensively. However, it’s not a user serviceable problem and will need to be repaired qualified service technician.

My name is Rick and I’m a professional repair technician with over 20 years in the business and have repaired many of these. I’m semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

http://www.nodevice.com/driver/MV700/get37139.html

You never pay for device drivers, they are always free on the internet

cerco driver x canon mv700 grazie

This Service Notice will update Canon U.S.A., Inc.'s previous CCD Image Sensor Advisory, dated October 6, 2005.
It has come to our attention that the vendor-supplied CCD image sensor used in certain Canon digital cameras and digital video camcorders may cause the following malfunction: When the product is used in recording or playback mode, the LCD screen and/or electronic viewfinder may exhibit either a distorted image or no image at all. While reports of this malfunction have been rare in the United States, we have determined that it may occur if the product is exposed to hot and humid environments.
Notice of Additional Affected Products:
As a result of our continuing investigation of this malfunction, we have determined that the 11 models listed below, in addition to the 16 models listed in our Service Notice concerning this malfunction, dated October 6, 2005, may be affected.
Affected products:
- Camcorders: ZR60, ZR65 MC, ZR70 MC, ZR80, ZR85, ZR90, ELURA 40 MC, ELURA 50
- Digital Cameras A60, A70, A75, A300, A310, S230, SD100, SD110, A40(*), A80(*), A85(*), A95(*), S1 IS(*), S60(*), S200(*), S330(*), S400(*), S410(*), S500(*)
*Models added as of Oct.31, 2006
Malfunction:
It has been confirmed that the connecting parts of the internal wiring of the CCD used in affected products may become disconnected, especially if the affected products are stored or used in high-temperature and high-humidity environments. If this occurs, the signal is not output from the CCD normally in Shooting Mode, which may cause a distorted image or the absence of an image. This malfunction can be confirmed on the LCD monitor screen during shooting. The same malfunction also appears on the recorded image.
Canon's Response:
Effective immediately, and regardless of warranty status, Canon will repair, free of charge, the products listed above exhibiting the above-mentioned malfunction if Canon determines that the malfunction is caused by the CCD image sensor. Canon will also cover the cost of shipping and handling in connection with this repair.
U.S. residents are kindly directed to contact the Canon Customer Support Center for further assistance at 1-800-828-4040. Support hours are Monday thru Friday - 8:00 AM to 12:00 midnight; and Saturday 10:00 AM to 8:00 PM (all times EST). Alternatively, if electronic support is preferred, please send your email to [email protected]
This information is for residents of the United States of America and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.
We sincerely apologize for any inconvenience caused by this issue, and appreciate your understanding in this matter. Thank you for your support and patronage of Canon products.

Had the same problem. It's ainternal flex wire connecting LCD with camcorder. Got from the repair shop did it by miself and it's like knew. It's very common in sony. Good luck
Meggita