Top 20 HP LaserJet 2200 Printer Questions & Answers

Remove top & side covers to reach laser scanner assm(see laser scanner assm,fig1) remove cover as specified in fig, remove 'C; clip to un lock ,take out scanner motor, lubricate shaft with good lubricate fix as it is..try..For further assistance pl get back... pl take care while handling motor to aviod fingure printers on reflector..

When the printer is READY, press and release GO and Job Cancel at the same time.
The 2nd page printed will list the JetDirect info. Look at Product Information

download the driver from hp website or try a diferent conection, if are using paralell change to usb or lan

Try Using the HP Print Diagnostic Utility in Windows - HP Customer Care (United States - English)

hi

please rate my service

you can download the drivers from this link, once you slecet the operating system you use.

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=28862&lang=en&cc=ca&prodTypeId=18972&prodSeriesId=28861&taskId=135

http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/bpl10361/bpl10361.pdf

If the paper lift tray doesn't engage - then you get out of paper error.
Hope this corrects your issues. I've found this tray stuck in the down position.
When the tray should spring up.


Thanks for your visit to Fixya.com

check this link, this might help you!

http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/pdf/eds_laserj_c7058a_v1.pdf?jumpid=reg_R1002_USEN

flshing orange lights may be happends from anything , check the tray u fix the paper well, check any paper jam in ,printer for more truble shoot you can visit www.hp.com

Have you scan to see if you have a bug hideing in your system. Programs dont leave by there self. Use a program to scan your reg files. and system 32 files. Good luck

Buy a PC

Dear,
I think the problem is in the printer setting, so just uninstall the Printer(Driver). Restart the PC and reinstall the driver.
It may solve your problem.

Regards,
Rakesh Kumar

Try using the November 2008 Driver...

HP LaserJet 2200D Linux Driver

VERY INTERESTING! lol. Not a Lot i know to try, But just re install the printer, I know on most HP Printers they require the printer to be unplugged while installing, But on Mac i hear they automatically install, So it HAS to be plugged in... just delete the printer driver and try to reinstall. Hope this helps!

This is not the fault of the printer but the fault of word.

The way I did it successfully was as follow:
File > Page Setup > Layout = Landscape (sounds like you have already done this)

In the print dialoge, instead of OK, click Properties. On the layout tab, select landscape and below that select pages per sheet = 4 and then click ok... Then click OK to print.

Hi Bob,

A lot of the time devices plugged into a USB hub don't receive enough power to run correctly. One possible solution is to get a dual-input usb cable and try using that. These cables connect to a usb device and then have two jacks for plugging into ports, which may supply enough power. You should be able to find them online fairly cheaply, so if you can spare 2 spots in the usb hub that may be your best bet.

Question edited for clarity and toss in a load of CAPS. Question moved from 'Jet Office Equipment' category. It's not good!

HP Color LaserJet Pro MFP M477

Printcopy.info https://printcopy.info > brand=HP > code=58 Code: 58.04; Display: 58.XX Error, Turn off then on; Description: The product has experienced an error with the low voltage power supply. Missing: M130fw. ‎' Show results with: M130fw.

58.04 printer display error on powerup

HP Support Community https://h30434.www3.hp.com > td-p Aug 2, 2018 - THE ERROR CODE PROBLEM OF MOTOR POWERSUPPLY BOARD (SMALL DAUGHTER BOARD TOP OF THE SCANNER UNIT), Transistor no of 905,903 like ..before you change check motor ... My printer is displaying, "58.04 Error power outage detected... Jun 28, 2022 Laserjet Pro 400 MFP 451dn error message 58.04 Aug 5, 2013 My laser jet MFP M477fdw printer is showing 58.04 error cont... Sep 22, 2021 HP M451 Error 58.04 - HP Support Community - 5830295 Nov 1, 2016 More results from h30434.www3.hp.com Missing: M130fw. ‎' Show results with: M130fw.

Error Codes > HP > LaserJet Pro MFP M130 > Code 58.XX

Printcopy.info https://printcopy.info > brand=HP > code=58 Code: 58.XX; Description: The product has experienced an error with the low voltage power supply. • 58.04 = Low voltage power supply malfunction; Remedy: 1. ..

Not available online. Contact them direct or ask in their forums.. https://www.google.com/search?q=HP+LaserJet+M72625+service+entry+code ..

Troubleshoot the wired network connection Make sure you are using an undamaged Ethernet cable, check for a green light near the Ethernet port on the printer, and then print a report to verify the connection. Turn off the printer, and then disconnect the Ethernet cable from the router and the printer. Check the cable for damage, and then verify that it is an Ethernet cable and not a phone cable. NOTE: Ethernet and phone cables look similar, but Ethernet cables are usually bigger and have eight visible wires on the connector. Reconnect the cable to a different Ethernet or LAN port on the router, and then connect the other end to the printer's Ethernet port. Turn on the printer. Check the lights on the printer's Ethernet port to make sure the connection is successful. The green light should be steady, and the orange activity light should blink. Print a Wireless Network Test Results or Network Configuration report. Inkjet printers with a control panel menu: Open the Wireless, Network Settings, or Setup menu to locate the list of available reports. Most inkjet printers without a control panel menu: Press the Wireless and Information buttons at the same time, or press the Wireless and Start Copy Black buttons at the same time. LaserJet printers: Press and hold the Wireless button for 10 seconds or until the Ready light blinks, or go to the Wireless menu and select Wireless Network Test. Laser NS and Neverstop Laser printers: Press and hold the Resume and Wireless buttons for 3 seconds. DeskJet 6000 and 6400, ENVY 6000 and 6400, and Tango printers: Touch and hold the Information button until all control panel buttons light up, and then touch the Information and Resume buttons at the same time. Make sure the Network Status is Ready, or follow any instructions to resolve network issues identified on the report. Regards, Rachel Gomez

Checkthe laser unit shutter