20 Most Recent HP LaserJet 1022 Printer Questions & Answers

Check if you are using the latest version of your printer driver and software. If this does not resolve the problem, roll-back or install the last working version of the printer driver. Ensure that you are using the latest version of your operating system, printer firmware and software. 123 hp com Quick HP Printers Setup Easy Installation Guidelines

Paper keep on jamming - HP LaserJet

one print out & red is blink

HP LaserJet 1022 Printing Blank Pages

Probably size mismatch. Check document paper size in your application.

1. Check any paper jams in side.2. Check cartridge.3. Remove back cover, clean paper sensors.4. Replace Formatter board.

Hi, If you're trying to connect to another computer, make sure that computer is on, that you have enabled file and printer sharing on both computers, and that file and printer sharing can communicate through your firewall. For more Help Read... Troubleshoot file and printer sharing and HP Printer Installation Thanks

Only half side printing on a page. Missing left half of document. Desparate teacher

Installing new drivers dind't help. But what I did is I checked print as an image from within pring options in Adobe Acrobat (you gotta go to "advanced" to find that check box), and then it worked.

Jan 2013 Installed this new printer driver and all my HP 1022 problems disappeared; now printing perfectly back as usual! HP Printer Drivers v.2.13 for OS XClick on the link above or copy and paste the following address into your Web browser to view the article:<http://support.apple.com/kb/DL907?viewlocale=en_US>

If you are using a Windows PC you have to go to control panel, printer options, and calibrate the printer. Follow the steps to do so. Make sure you have the proper driver installed as well.

Please, read this maintenance document first and try again.

set the paper tray limiters to fit the paper edges properly.

This could happen due to1. Worn wiper blade2. Worn Drum3. Worn PCRabove 3 are inside the toner, if you know how to replace them replace or install a new toner, if the problem still persists you have to check the fuser or contact a technician..