Top 20 HP LaserJet 4345mfp Printer Questions & Answers

Try this

You can try to go in the service menu.
You can find this in the administration menu, go all the way down and you will see "service".
You need to insert the service code : 11434506
From there you can reset the maintenance count i guess.

This error can be caused by the following: 1. Fuser that is close to end of life. Maximum print quantity is 225,000 pages. 2. poor quality paper, very thin paper never feeds well and will jam. 3. Printing an image that is almost entirely black can cause the paper to buckle before entering the fuser. Try different paper to see if that resolves the problem.

You would need to log into the embedded webserver to view the configuration page. From there you could screen capture it as I do not believe that the print config page was added until later models.

Check ADF unit (automatic document feeder) working condition. For diagnoses : Insert few paper(ex:10papers) in ADF unit & do copying, if UR succeed in copying, ADF is working well.. If not check the fault. HP M4345 facilitated with digital sending option., for configuring digital sending U need to create shared folder with fully permissions in system. Better visit hp site or google to know about how to create folder.. You can do multiple scanning once configuration completed successfully..for more info visit: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c02720194-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1409945500358.876444892.492883150

Bad engine power supply

this printer detect paper size error

49.XXXX is a fatal catch-all error. Could be firmware problem, network, print job. If the error occurs when you try to print, clear the print queue. If the error occurs when the printer is just sitting idle, reseat the formatter. Try powering on without the network cable attached. If it still happens replace the formatter. Could be a corrupt print job being sent to printer. Print something else.

58.XX ERROR To continue turn off then on

A memory error has been detected.

58.4 = Engine power supply Replace the Engine power supply assembly (100-127 volt) is part number RM1-1041-000CN (220-240 volt) is part number RM1-1042-000CN

Paper jam inside top cover area. The paper didn't arrive at the paper-delivery sensor on time. This is usually due to worn out paper pick and feed rollers in the paper trays. Replace the rollers and you should be good. This error also occurs if your paper has a high moisture content, is the wrong kind of paper (too thick or too thin), or is loaded in the paper cassette incorrectly.

13.33 = Paper jam inside top cover area. The paper didn't arrive at the paper-delivery sensor on time. This is usually due to worn out paper pick and feed rollers in the paper trays. Replace the rollers and you should be good. This error also occurs if your paper has a high moisture content, is the wrong kind of paper (too thick or too thin), or is loaded in the paper cassette incorrectly.

dear friend, for slow print many reasons: 1- check tray adjuster 2- check tray customs or standard lock( it will be right side tray lock) 3- check your printer driver 4- check printer firmware 5-check printer fuser these are the reasons printer work slove

the problem may be the scanner are you able to scan to pc or email/fax from the machine glass/ when the machine initializes are there any faults displayed ( the printer will continue to function even if the scanner fails) usually the error code 30.01.02 or something like that will be displayed- the scanner is connected via 1 large connector found to the rear of the machine - does the cable look damaged in any way- is the connection 'good' has the grounding wire worked loose, if after these have been checked there is still no scanner then you may need either a scanner or main PCA/formatter fot the printer. Belmonte business are able to help with the repair of this unit should it be required and would be subject to the usual costs. available on 0161 480 5556

dear friend, 494 c18 error belongs to 3 reason 1- check ur print server Que may be any junk file will be there or error documents will be there.(if you are using windows 7 then it easy to solve} 2-- printer firmware problem- update your printer firmware latest, 3 - check your formatted board

you have the wrong type of fuser - probably HP 4200/4300or 4250/4350. these units look IDENTICAL the correct fuser unit assy part number is RM1 1044 a small white barcoded sticker should be present with the part number on the base plate of the fuser unitt

Sir/Madam i think Your HP Printer Need reconfiguration Or reinstall For Hp Printer Driver Or Software Update,but Before you Do that I suggest To To Below Link and Perform,few Step For Your Hp Printer Touch screen problem, http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/mostViewedDisplay?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_efb5c0793523e51970c8fa22b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c03559857-1%257CdocLocale%253Den_US&javax.portlet.tpst=efb5c0793523e51970c8fa22b053ce01&sp4ts.oid=2512319&ac.admitted=1389823098289.876444892.492883150 Incase Your Problem Is not solved Then Follow Us Hear For HP Printer Support

the hp 4345 is a very reliable piece of kit they suffer generally from the fuser swing plate and ADF mylar failures. if you can give me some more details I.e. we had to restart th machine due to it not printing- has the machine been allowed to come to ready? if so is it possible to take a simple copy from the glass ? if it comes to ready and is able to make a photocopy and your still not able to print then the error lies between the IO card and your computer. try reinstalling the printer driver if that is the case. please when giving information about err??? please include all characters seen on the display an example fault code would look like error 59:00 with a possible expansion code of 0c00340021 these are the important details that tell the engineer which part in the machine is being reported as failed without these details you may as well just say my printer aint working whats wrong with it ( Actually that is exactly what you said).

A main motor error occurred. X description: 0 = Motor error 1 = Motor startup error 2 = Motor rotation error 1. Turn the printer off, and then turn the printer on. 2. Check and reseat the fuser and toner cartridge to make sure they are not hindering gear movement in the drive train. 3. Check the main motor's cable to ensure that it is seated properly. 4. If the error persists, replace the main motor.

If your trying to send this through your email provider, most of them do not allow for Open Rely(anonymous sending) if you have the option of supplying credentials on the printer you will probably need to do that.