Top 20
HP LaserJet 2840 All-In-One Printer Questions & Answers
HP 2840 after initalisation errorcode 54.2
Either a bad cartridge or your carousel is not synchronized properly. If you just replaced a cartridge that is likely the source of the error. You can find videos on YouTube on fixing the carousel issue.
Scanner Code Error 3
I suggest you download the HP toolbox according to your OS. This will give you a better understanding of the problem
You can get the link from the HP support website
2840 laser printer only prints on right side
and nothing on left side
h30434.www3.hp.com > ... > Scanning / Faxing
Apr 26, 2011 - 2 posts
I have a HP Color LaserJet 2840. If I am ... My Color LaserJet 2840 will only print on the right side of the page, how can I fix this? ... If I am copying or printing from the computer, the printer will only print the right side of the page. ... something obstructing the laser scanner blocking that side of the media path.
www.fixyourown
printer.com/posts/46992
Feb 1, 2010 - ... Apr 19, 2007 at 10:57am. 0. HP Color LaserJet 2840 ... I have the same issue as above-Not printing on the left side of pages.I went threw the ...
Sending fax displays comm.error
There are many things that can interfere with proper sending of faxes. Has anything changed in your office recently? Phones changed? Did you recently get DSL service from your phone provider? If so, you probably need a DSL filter on the line going to your fax machine. Try faxing to different faxes to make sure that it is not the person you are sending to that has the problem. If you are using Voice Over IP or VOIP phone, good luck, as older fax modems do not always play nice and you will likley need to speak with your VOIP provider to ensure they have their lines configured. If nothing has changed in your office then perhaps your modem has just failed, it does happen. A new cord between the jack and the machine is a a cheap test as well. If you have a telephone, unplug the fax and plug in the phone and see if you can make a call.
USB printing problems
Hi,
If the USB cable is too long, you may have problems... I would guess the cable length should be shorter than 10 to 15 feet.
More likely, the driver is not looking at the USB port...
Go to the driver "printer... properties... ports" and try "DOT or USB" ports...
If yoy see an "LPT!" or "IP_1" selected, it is not channeling the print job to the USB port.
LPT1 is a parallel port and the IP_1 is an ethernet port!
Yellow color does not printing
did you remember to remove the pull strip from the cartridge? Other possbility is a bad cartridge, if you still have the old cartridge, put it in and try a print. If that does not produce yellow then you might have a broken contact on the yellow cartridge bay.
Black stripe when printing from hp laserjet 2840
Cartridge faulty...
Two ways you can find out the faulty cartridge.
1. Remove each cartridge, just flip the drum shutter & chk for any toner bands appears on drum surface.. if found replace that cartridge..
2. Go to the paint. create four colored page as shown, print & verify which colored print mixed with bads.. replace that cartrdige.. ">
How to enter fax number on hp2840
Press "Menu" button, scroll to Device settings, enter, scroll to "Fax settings", enter, scroll to "general", enter.. There you can enter header & other basic setups...
Hpclj2025 Printer squeaks
Cartridges are the most common area of noise on these printers. If you are using reman or 3rd party, get used to it because most of them are really noisy.
54.2 code what does that mean?
Description
The device has experienced an internal hardware error.
Recommended Action
Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
How do i reset toner level
by purchasing a new toner unit perhaps- you should never run a toner unit beyond its working life preset- parts have worn developer has worn down drum surface will be scarred drum blade will be blunt-etc etc etc..... replace with NEW and have 100% life bar
Not finding what you are looking for?