20 Most Recent HP PhotoSmart 7350 InkJet Printer - Page 7 Questions & Answers

I would suspect a clogged or empty ink cartridge. Put the bottom of the cartridge in a small cut of very hot water, near boiling for about 30 seconds, it will clear the clog if that is the problem.

They aren't going to give you that. Circuit board design and components are considered proprietary information. Best you'll be able to do is a pwr supply off eBay or a defective unit you can pull a good p/s off. Good luck.

Check cartridges are correctly installed. Clean gold contacts in cartridge carrier.

Your cartridge was damaged by the refiller. As they wont assume responsabilty, your only option is to buy a new one

If the test print from within the machine prints fine then check your settings on the properties of the driver software or if not it could be a torn fuser film.... Hard to say without looking at it but thats what i would check first

Check carefully to make sure there is not a small piece of paper still stuck I the printer and blocking the carriage. Also make sure that the cartridges are seated properly.

try this solution :------------------------------------Follow the steps below, and let me know what happens?Step one: Clear temp directory

1. Type %temp% in the run or search for programs and files field
2. Highlight all the files in this folder, and then press the delete key to delete. If you get a message that the file is in use you will need to skip this file(s).
3. Continue with Step 2 below

Step two: Downloaded and extracted to your system:1. Download the full feature software and driversNote: Go to HP Customer Care, and then enter your printer model. Download the full feature software and driver, and then follow the remaining steps below. If your product doesn't have the uninstall_l4 then please let me know what printer you have and the operating system you are running.2. Once the download is finished double click on the file to extract the software.3. When the installation window opens press the cancel button to stop the installation4. Type %temp% in the run or search for programs and files field5. Look for, and open the folder starting with 7z (Example: 7zS2356)6. Right click on the folder, and select Copy7. Close that window, and all your open windows, and then in the middle of the desktop right click your mouse, and select Paste. This will move the 7z folder to your desktop.8. Open the 7z folder you just copied to your desktop9. Open folder Util10. Open folder CCC11. Run the uninstall_L4 (.bat or .exe)12. When the uninstall has completed restart the computer13. Run Disk cleanup from Accessories\ System Tools folder under all programs14. Download and install the latest version of Adobe flash playerhttp://www.adobe.com/support/flashplayer/downloads.html 15. Open the 7z folder, and then double click on the Setup.exe file which will be toward the bottom of the open window. Follow the on screen instructions to reinstall your printer.Let me know if you are able to successfully install the software and driver, and are able to print & scan?

did You replace the regular Printer paper with Photo grade Paper?

Check the black ink cartridge. If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Use your machines built in programme to clean your ink jet heads

Use your machines own programme to clean the ink heads

Printers have a paper out sensor and corresponding flag that hangs down under the printer when the paper tray is removed or opened. From your description there is some issue with this flag and/or sensor which is registering the paper out signal when in fact paper is loaded into the tray and the tray is installed. Hope this helped. Tony www.aimdistribution.com