Top 20 HP Officejet 7210 All-In-One InkJet Printer Questions & Answers

I suggest uninstalling the printer, restarting and reinstalling, meanwhile disconnect the printer from the computer and the power. If the printer still doesn't behave after it has been disconnected half an hour or so it is probably faulty, or the new cartridge might be faulty. My HP printer has a cartridge priming option that must be used after it has been idle for a while or a new cartridge fitted.

Hi there, my name is Lisa and I'd be happy to help. I have checked the specifications for the Officejet 7210, and from what I can see, 9x4 envelope printing is not supported. Here are the 4 supported envelope sizes: U.S. 10: 105 x 241 mm (4.125 x 9.5 inches) A2: 111 x 146 mm (4.4 x 5.8 inches) DL: 110 x 220 mm (4.3 x 8.7 inches) C6: 114 x 162 mm (4.5 x 6.4 inches) I hope this explains what the 9x4 isn't working. Feel fee to take a look at the specifications using the following link: Printer Specifications for HP Officejet 7200 All in One Printer Series I hope this helps. I work on behalf of HP. :)

What does printers troubleshooting softwere (included in installation cd) say? If you cannot communicate by WiFi, you will need to connect by USB cable.

You should do a printer calibration for the label paper you are using or get Avery's templates. It is a free download. Blank Templates Business Card Templates Label Templates Avery

Look for the label template in Word or go to the label maker website to download the label template. This is easiest way.

Printer Printing blank page issue can be occurred when you have low or dried ink cartridge, blocked nozzles, dirty print head and ink cartridge installed improperly. Follow the troubleshooting steps to fix printer printing blank pages: ·Restart the printer ·Check printer ink cartridge ·Clean the printer print head ·Update the printer drivers Follow more steps to fix the Printer printing blank pages issues

There was a communication error with the receiving fax machine due to poor telephone line conditions. Solution

• Set the receiving machine to receive at a slower transmission speed
• If the session fails after sending several pages of a large document, resend the document as several smaller documents.
• Retry the fax reception at a different time when telephone line conditions have improved. Call the telephone provider if line conditions fail to improve.

This means one of the cartridges is defective, they cant align if they cant print. What i did to fix this problem is insert 2 working cartridges and get it to align properly, even if they are low on ink, then lift the cover and the cartridges will move to the center. When this happens pull the power cable out, then insert the full non functioning cartridge. Plug the power cable back in. I tried this with a color cartridge, the color cartridge was non functioning but i was able to print in black. Basically you align the cartridges and then swap them so the printer thinks they are still aligned. The color still doesnt work and it is probably a defective color cartridge.

If the paper does not feed in straight then the rollers maybe sticky and needs cleaning. Try using methylated spirits to clean the rollers.

alot of printers are out of date after they are less than a year old , have tried reinstaling it with the original soft and, tuned off all automatic updates? if you havnt, remember reinstall it with no updates to software, otherwise , software updayes will automatically kill it.

Hi,

in the case of error, the first thing to do is to reset the printer. Follow the below steps to reset the printer:

Without turning off the product, disconnect the USB cable from the rear of the product.
Remove the cartridges from the product.
Wait for the 'Insert Cartridges ' message to display on the control panel.
Disconnect the power cord from the back of the product.
Wait 60 seconds.
Reconnect the power cord. If the product does not automatically turn on, press the Power button.
Reinsert the cartridges, and then close any open doors on the product.
If you receive a prompt to print a calibration page, do so.
Reconnect the USB cable to the rear of the product, and then try printing again.

Or, completely uninstall the printer from the system, re-install it, then try again. I hope you have the printer's software.

First, go to Start > control panel > printers.

Right click on each printer icon you see, scroll to delete and click. Make sure all the printer there are deleted.

Go back to control panel, click on program and features (for windows vista/7) or Add/Remove Programs (win xp).

Disconnect the printer cord from the computer.

Uninstall every driver/software that is associated with the printer.

Restart your computer.

After your computer has been restarted, install the printer driver afresh and connect the printer to the computer.

If this doesn't solve the problem, you will have to download Hp diagnostic utility on your your computer,install is on your computer and it will help to detect and solve the problem.

Visit the hp link below, read all the information on the page and download the diagnostic tool from the page.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114788&tmp_task=solveCategory&lc=en&dlc=&cc=us&product=441125

Good luck.
Walesarumi

Hi there,

Did you remove the tape from the cartridges before you installed it?

Did the printer work before?

Let me know because I would really like to help

Andre

Hi

Black is not True black. It is slightly brown.

Printing in black uses mainly black but may also a tiny amount of a mixture of some of the other colours.

To minimize the usage of other colours:

HP Solution Center > Settings > Print Settings > Printer Settings > Color > tick Black Print Cartridge Only > OK.

HP ink can be expensive. It is possible to economize on HP inks in some cartridge formats by using Ink refill kits.

I hope this helps.

You may be able to download a Windows 7 printer driver for your model printer from the HP WEB site.
If there is not one available, then HP considers this printer too old or not compatible with Windows 7 and they want you to upgrade your printer.
You can download the HP printer drivers from their supportWEB site. Please click on this link and select your model printer to download:- http://welcome.hp.com/country/us/en/support.html

hi, make sure your cartridge is the same replacement of your original one. try to clean contact point of the cartidge and from the printer. clean it with a peace of paper.

hi

could you please scan the page and upload so i can help you more?

this link will help you!copy and paste this in your browser's main address bar and hit enter
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00257147&cc=us&lc=en&dlc=en&product=391153&tmp_track_link=ot_search
or on the printer control panel,press the setup menu (wrench button),then push righ arrow to go tools ,push ok then select display estimated ink levels,push ok.

1. Press SETUP 2. Press 7 and then press 1 This select Preferences and then select Set Language & Country/Region Scroll through to English using the right arrow key > 3.Press OK 4.When prompted press 1 for yes. The country/region for the selected language appear. Press right arrow key > to scroll through the list 5. Use the keypad to enter the two digit number for the appropriate country/region. 6. When prompted, press 1 for yes You can print a Self Test Report to confirm the settings 1. Press SETUP 2. Press 2 and then press 6.

Hello Debbie192,
Go to the HP suppport page http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&tmp_geoLoc=true&product=391153 Enter your operating system , You should see all available file for Download including Product installation software and driver