20 Most Recent HP Officejet 7210 All-In-One InkJet Printer - Page 7 Questions & Answers

This is a missing file from your Operating system and you need to re-install/repair your OS to restore it.........nothing to do with printer.

Cartridge is faulty or printheads are gone bad

Try this simple step,

Disconnect the power cord from back of printer ( while printer is on )
wait for 10 seconds and connect it back
let the printer Initialize and Try to scan.

IF this does not work, you probably just need to uninstall and reinstall the drivers.

check out my sulutions for this problem on my profile page

Sometimes the paper quality is the problem. Run your printer program for an cartridge aligment,

Content paper jams with my L7590

I believe there is a memory of faxes sent, but I'm not sure about the memory capacity. Refer to your manual for the machine- look for something like "History Record", "Faxes Sent", or something similar to that. A co-worker did this on a machine a few years back, and unless the machine has exceeded it's memory, or the memory's been cleared, the date record should still be there.
If the machine is still under warranty, try calling a support line. They can walk you through the steps to retrieve your info. Good luck, hope this helps.

HP Printer 7210 or 7310 Gives Error receving faxes Load a new blank paper on paper tray.

Press * and # simultaneously, and then release both buttons.

Press 1 , 2 ,and then 3 . The Service menu appears.

Press the right arrow button (>) until the System Configuration menu appears then press OK.

Press > until Media Sense Calibration or Calibrate Spot Sensor appear and then press OK. The unit should pick the paper and eject it.

Press the Cancel button until date and hour appear on display

Hello,

you can use super glue to gum the broken part. Gumming the broken part will be the best option you have now, because I don't think you can get the replacement of the broken part.

I would advice that you get gum the broken part.

Good luck.

Check that the cable is connected securely and not skewed

Please rate my help++++Thansk for using FIXYA

The time and date can be set from the front panel only.

1. Press Setup .
2. Press the number 4 button on the numeric keypad.
3. Press the number 1 button on the numeric keypad.
4. Enter the date in two-digit numbers (for example, 01-01-01) . If the last digit of the date has not been modified, press OK .
5. Enter the time in two-digit numbers. If the last digit of the time has not been modified and it is displayed in the 24-hour format, press OK .
6. If the time is displayed in the 12-hour format, press 1 for AM or 2 for PM.

:) Dr Tony

make sure you have installed the driver for its scanner, try to reinstall it, just put on the driver cd then install everything again just to make sure.

Step 1:-
First of all go to the printer--> Press setup button on it --> use the Arrow keys --> choose the tools option --> now choose the option Print a test page--> If the test page prints fine--> The printer is fine. No problem in the printer.
Else take out the cartridges and clean it with a lint free cloth. ( Remember when cleaning the cartridges DO not touch the nozzel of the cartridge. Just clean the out side of the cartridge nozzel.)
Step 2:-
Try to change the color of the font on the document you are printing and then try printing. You will get to know if it is actually printing or not. If it is not printing in color also then try this ...!
Click on start--> go to control panel--> go to printers and faxes or printers option and then right click on the printer and choose properties option. Click on the print a test page button.--> Check if it works.
Let me know if it works..!

you just print
printer will let you print

Not to say you're not doing it right, but just checking- are you removing the plastic tape over the print head? Some people forget to do this, and it won't work until you do. You might try taking a soft cloth soaked in a bit of alcohol to try to get the ink flowing (the cartridges could just be a little dry). Make sure the printhead contacts on the printer are clean. I've read they recommended resetting the printer, but not owning an HP, I'm not sure how they do that (refer to your manual). I've read good and bad about this HP, so I'm hoping you have luck with these suggestions.

Go to web page and dowload manual

http://safemanuals.com/annexe_Quick%20Start_HP_OFFICEJET%207210-_E.htm

this error is recomded for the printer becouse printer will count the print out

There's a trap door in back, remove it and easily access the paper jam- credit for this answer goes to my very wise husband.