20 Most Recent
HP OfficeJet 6210 All-In-One InkJet Printer - Page 6 Questions & Answers
Can I print from my ipad?
why not? and you can first transfer the files to your PC.that is easy with a software called iTransfer.it can help you Transfer/Copy videos and audios among iPod, iPhone, iPad, iTunes and PC.
This iPad transfer is really good,Hope it helps.
All lights flashing
HiCheck through the paper paths for any obstructions.Remove stuck papers and make sure the paper feed tray is not filled to capacity.Clear any print queues.Disconnect the printer from power and re-connect again.Turn it on and try printing now.Hope it helps.Thanks!
HP officejet 6210 all in one...message is"remove
Hi Jim,When you install a new cartridge, be sure not to touch the contacts, and make sure the contacts on the cartridge align with the contacts on the printer, and all packing tape has been removed. If the contacts on the printter are coated with dry ink, you should clean them with a cotton swab and distilled water. Dampen the swab and wipe off the dry ink on the contacts and let it dryt. Also, run the cartridge alignment on the new cartridge. I hope this helps. Let me know if you need further assistance.Randy
I need a beginner's Manual
Hi Norma:I suggest visit this link to download your manuals for
HP Officejet 6210 All-in-One PrinterHope this helps; also keep in mind that your
feedback is important and I`ll appreciate your time and consideration if
you leave some testimonial comment about this answer.Thank you for using FixYa, have a nice day.
Can not uninstall officejet 6210
Go to control panel, select add & remove, check for the hp oj 6210 programmes, select remove,wait till remove, restart system, load the drivers..
Don't have software for 6210
Hi,
You should have the software or driver disk with your printer, inside the printer box.
If you can't find out or lost the disc then you have to download it from web. visit www.hp.com search the driver with the model number of the printer and download it.
Printer is on and plugged in but says it's
Once its showing there is no communication between system & printer. Check with another usb cable...Go to my computer properties # hardware # device manage # highlight any one of the list # action# scan for new hardware.. system will scan for new hardware, if its not found replace formatter....
Not finding what you are looking for?