Top 20
HP Color LaserJet 2600n Printer Questions & Answers
HP Color LaserJet 2600n install windows 10 v.1903
If Windows 10 v.1903 can not find correct driver for network printter, connect it directly to computer with USB printer cable. After that HP Color LaserJet 2600n driver was found at windows 10 version 1903. I discconected network cable and shutdown the printter before using usb cable
Disconnect and shutdown printter.
Now you can add TCP/IP printter using current drivers.
No longer printing in black
Check out black ink level? If good do a hard reset of printer along with a software reinstall. If that does not resolve the problem you may have a defective print head or just a bad
black cartridge since on may HP units the print head is built into the cartridge.
8/30/2017 11:36:03 PM •
HP Color...
•
113 views • 0 helpful votes
What is the error code 51.22
This is not a SMALL error. It will invariably involve servicing by experts and parts. Workmanship and quality will depend on factors like country and skills availability.
It might not be cost effective too. Please research if it is worth to repair rather than buy new model with warranty based on price of new and how old your printer is.
51.22 Error Turn off then on
Error message
51.22 Error Turn off then on
Description
Magenta laser scanner error. The device has experienced an internal hardware error.
Action
- Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.
- If a surge protector is being used, remove it. Plug the device directly into the wall socket. Use the power switch to turn on the device.
- If the problem continues, contact HP Customer Support Center for technical assistance athttp://www.hp.com/support/clj2600n or see the flyer that came in the printer box for additional contact information.
4/1/2016 12:32:06 PM •
HP Color...
•
410 views • 0 helpful votes
Can't find system setup
As this is network printer it should be reachable from internet browser. You just have to check what IP was assigned to the printer and point your browser to it.
8/24/2015 6:27:20 PM •
HP Color...
•
74 views • 0 helpful votes
Fix Paper crinkling on the left of each page starting about half way down?
Crinkling paper is usually due to either an obstruction in the paper path or a bad fuser, which is the part of the printer that heats the toner so it melts to the page. It is located at the top of this printer. It can be a little challenging to see the fuser on this model, but if you look close you should be able to determine if the fuser is bad. You might also have a bad transfer belt, inspect it closely on the side the has the crinkle.
2/28/2015 4:31:44 PM •
HP Color...
•
206 views • 1 helpful votes
How to hook up wifi connection up to hp color laserjer 2600n printer
Most WIFI adapters operate much like the old Jet Direct cards. They attach either through the Parallel Port or the USB Port on the printer.
Once it is plugged in and attached to the printer you will need to search for teh WIFI device on the WIFI network where you can configure it. Then it is just a matter of setting up the printer on your laptop/tablet like any other printer using the WIFI port defined on the WIFI network using the HP2600 drivers.
10/13/2014 12:41:26 PM •
HP Color...
•
207 views • 0 helpful votes
How to hook up wifi connection to hp color laserjet 2600n printer
Most WIFI adapters operate much like the old Jet Direct cards. They attach either through the Parallel Port or the USB Port on the printer.
Once it is plugged in and attached to the printer you will need to search for teh WIFI device on the WIFI network where you can configure it. Then it is just a matter of setting up the printer on your laptop/tablet like any other printer using the WIFI port defined on the WIFI network using the HP2600 drivers.
10/13/2014 12:43:40 PM •
HP Color...
•
135 views • 0 helpful votes
Why i can not remove toner cartrigde in hp 2600
There is a cartridge lock that is linked to the transfer belt and front door. If that link breaks the locks may not disengage. Usually the jam so that you cannot insert a cartridge. Look for the white or black hooks on the left and right side of the printer cavity. You may be able to shift them up with a small screwdriver.
9/3/2014 2:26:35 PM •
HP Color...
•
95 views • 0 helpful votes
Not finding what you are looking for?