20 Most Recent HP Color LaserJet 2600n Printer - Page 3 Questions & Answers

Which color is this line? Try changing respective cartridge..

It can be solved but need diassembly the printer to get ,laser assembly.

As this is network printer it should be reachable from internet browser. You just have to check what IP was assigned to the printer and point your browser to it.

Hi,
Just try the steps
Jam in output bin - fuser area Error messageJam in output binalternates withOpen door and clear jam DescriptionA paper jam has occurred in the output bin near the fuser area. Action

1. Clear the jam.
2. Press the (SELECT) button on the control panel.
   

Jam in output bin - duplex area Error messageJam in output binalternates withOpen door and clear jam DescriptionPaper jam in duplex reversing area Action

1. Clear the jam.
2. Press the (SELECT) button on the control panel.Please Rate my response!!!Thanks, SF
   

Print quality issues can be due to a number of things. There may be a defect in the cyan toner cartridge causing it to leak excess toner. The transfer belt could be dirty or defective. The printer may simply need cleaning. Given that you posted this question during the winter, it's also very likely a low-humidity environment is causing a high-static condition, randomly pulling extra toner onto the page. The easiest thing to do is clean the printer. Take a vacuum with a small attachment and clean out any excess toner. If you have canned air or a vacuum with a blower you should also blow out toner from any crevices that may not be reachable with the standard vacuum.If you have a spare cyan toner, you can try installing that and printing a series of test pages. The built-in demo pages are good as they will use a fair amount of toner and should help gauge if this solution helps.The transfer belt is the most expensive component to replace in the printer. If it needs replacement you will have to contact an authorized HP service company. However, before doing that, you should try the above steps and run a few iterations of the built-in cleaning process. You can navigate the printer's menus to find this function.Many people over-look low-humidity and static conditions, or do not believe they could have an effect on laser printers. However, static charge is the very principle on which laser printers work and is how the toner is transferred to and held on the page before it is run through the fuser. Low humidity can easily cause dirty printouts. Try placing a ream of paper in a more humid area for a couple days, then load the printer with that paper and print several test pages. You can also try placing a humidifier near the printer and leave it running for several days and try printing test pages again. If this solves the issue, maintain a humidifier in the proximity of the printer for the duration of the season until the weather warms up and the average humidity increases.

Crinkling paper is usually due to either an obstruction in the paper path or a bad fuser, which is the part of the printer that heats the toner so it melts to the page. It is located at the top of this printer. It can be a little challenging to see the fuser on this model, but if you look close you should be able to determine if the fuser is bad. You might also have a bad transfer belt, inspect it closely on the side the has the crinkle.

How do I turn on the color for th cp2025. I have a mac with snow leopard

Replace the fan

Looks like theres a problem with the color ragistration.
I would calibrate the printer. Heres how;

1. Go to "System Setup" on the display. Press Select.
2. Go to "Print Quality". Press Select.
3. Go to "Calibrate Color". Press Select.
4. Go to "Calibrate Now''. Press Select.
5. Press Select again to confirm Calibrate Now.

This will calibrate the printer and should eliminate the color registration problem you are having.

Most WIFI adapters operate much like the old Jet Direct cards. They attach either through the Parallel Port or the USB Port on the printer. Once it is plugged in and attached to the printer you will need to search for teh WIFI device on the WIFI network where you can configure it. Then it is just a matter of setting up the printer on your laptop/tablet like any other printer using the WIFI port defined on the WIFI network using the HP2600 drivers.

Most WIFI adapters operate much like the old Jet Direct cards. They attach either through the Parallel Port or the USB Port on the printer. Once it is plugged in and attached to the printer you will need to search for teh WIFI device on the WIFI network where you can configure it. Then it is just a matter of setting up the printer on your laptop/tablet like any other printer using the WIFI port defined on the WIFI network using the HP2600 drivers.

Please confirm the model you have as the 2600N is not a multifunction printer and cannot receive faxes.

There is a cartridge lock that is linked to the transfer belt and front door. If that link breaks the locks may not disengage. Usually the jam so that you cannot insert a cartridge. Look for the white or black hooks on the left and right side of the printer cavity. You may be able to shift them up with a small screwdriver.

If this error occurs upon initial power-up on the printer, remove all cartridges to check for the orange packing tape. If present, remove it before reinstalling the toners.

You can get the users manual here: http://h10032.www1.hp.com/ctg/Manual/c00295405.pdf

hi you have to check the door closer assembly there is a liver that operate the door sensor

That does not look like a standard HP error code, that would appear to be the self assigned Network Host name. If you are having a problem, describe it.