20 Most Recent Samsung RS267TDRS - 26 cu. ft. Side by Side Refrigerator - Stainless S - Page 4 Questions & Answers

Hi,
I am sorry to hear regarding the trouble.
This is a common problem on this model and unfortunately, there is nothing you could do other than unplugging the unit for few minutes, say 15 minutes and then turning it ON. This would usually reset the error code. If the problem still remains, then it is either bad thermal sensor or whole digital controller.
If you wish to repair, revert and i would be glad to provide few more inputs to the diagnosis.
I wish i could have a better solution.
Let me know,if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!

Samsung service manual If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

TRY SWITCHING OFF FOR TEN MINS THEN TURN BACK ON..

whats the make and model of the refrigerator

hi it will probally be the lower damper motor .. guy on you tube will be able to help , his email address is under some of the videos .. email him ..

">

Check for ice build-up in and around the freezer fan where the blades are, if you can see ice in there (some times it may look like white foam but dont be fooled, it will be ice), the fan will be hitting it, defrost the freezer and check defrost element, (you will have to dismantle freezer section to get to it but reletively simple job) disconect from mains first. Good luck

This requires system repair, replacement of drier, triple evacuation, and weighed in refrigerant charge.
May also need to change the compressor oil depending amount of moisture absorbed.
This is a timely and costly method which must be performed by EPA Certified Technician.

All question need full 'make model (what it is)', first 3 words. Google make model wiring diagram. Brown or Red is normally power and blue is return. https://www.google.com/search?q=Freezer+with+loose+red+and+blue+cables ..

you do not leave them alone they may have refrigerant flowing through them. look in your owners manual/instructions for more info.

Yes

Question edited for clarity and add CAPS. It seems to be a common occurrence on that model due to bad design. https://www.fixya.com/support/t17110008-norfrost_c6aew_chest_freezer_compressor Norfrost is owned by Ebac. Contact their customer service. https://www.johnogroat-journal.co.uk/news/caithness-freezer-name-lives-on-in-england-170710/ https://www.ebac.com/support/customer-service Another way would be to study the wiring as it is pretty standard. The video may help. https://www.google.com/search?q=freezer+wiring+diagram You may be able to freeze this video to note the wiring, although this only shows the thermostat wiring and is a bit fuzzy. Also an refrigeration appliance technician would know the wiring by heart and take 20 minutes maximum to work it out.

Hey. I dont suppose you figured out where the wires went all all? I've done the same thing ????

Question edited to add maker! All questions need 'make model (what it is) as first three words. That is an overheating fault. Replace the fluff with no fluff. Make sure the condenser coils are free of dust and there is good airflow Or It is low on refrigerant gas and you need a service tech.. ..