20 Most Recent
LG 6871ER1023Q Main Pwb pcb Assembly - Page 9 Questions & Answers
Front loader. What does error code OE mean?
Hi, The
OE code signifies that your
LG washer is unable to drain the water out during wash cycle. This
code can be triggered by a clogged drain pump filter or a drain hose that's kinked,
it could be that coins etc have blocked the pump or drain filter assembly, at the bottom right of the machine there is a panel, if you open this and follow the instructions to evacuate the machine of water, then open the cover behind it, and remove the filter assembly and clean it out maybe with an old tooth brush etc. and also the pump area
use a damp cloth to remove and grit etc from the thread and replace the cap securely, start the machine a new and watch for any leaks
check out this page for full details on this
https://howtofixit.net/lg-washing-machine-oe-error-code-explained/
i hope this was helpful.
Model WD-80154TP. Why does it stop washing at 15 mins?
Normally indicative of a 'slow fill' issue.
Turn off the water. Remove the hose connectors at the rear of the machine and check the strainers for limescale and debris. Have someone hold the hose in a bucket or sink and turn on the water to check flow and pressure. Reconnect, turn water on and check for leaks.
LG washing machine error code SE or 5E
LG list the error code SE.
Motor fault or fault in main control board. Try motor first.
Unfortunately with this code it can be either the motor, the main control board or both at fault.
Take the motor out, check the carbon brushes in the motor, if worn or damaged, replace them.
You should also check the wiring between the motor plug and pcb for broken wires.
If everything checks out ok then you are faced with replacing some expensive parts.
Washing-Machine-Troubleshooting
http://www.washerhelp.co.uk/diy-repair-help.html
www.stokes-aus.com.au/.../LG/LG%20Washing%20Machine/WD-8013F.pdf -
Above is the service and troubleshooting manual, above them are DIY washer repair how to sites real handy,
LG Steam Washer wont start
We need more information. What happens when you try? It could be the door switch is not working because it came loose or it could be something else. What is on the display? All info you can provide is a help
Not finding what you are looking for?