20 Most Recent Electrolux 2 Rapido Filter El019 For El800 Series Vacuum, Lot Of 2 - Page 3 Questions & Answers

Check to see if there is a crack in the ceramic plate. If there is any type of disturbance where the metal is glued to it or you don’t have both leads on the metal it will not work

Its dirty and needs to be cleaned

Where can one get a new bulb ballast for the UV801?

Try it in google

I would verify that all the parts you removed are properly seated back in their exact locations. There is undoubtably a safety switch that is not properly closed. A door, a panel, or a latch that is not properly seated and closing the safety switch is probably the cause.

Try this site https://searchmanuals.net/search7/?keyword=%2Bowners+%2Bmanual&gclid=CjwKCAiA8OjjBRB4EiwAMZe6y5_84V3ek15m17m45ZjUS8CJGN8CDmLdMHFmDUai5BTqkctyGuc0KBoCV8sQAvD_BwE

There might be one here https://searchmanuals.net/search7/?keyword=%2Bowners+%2Bmanual&gclid=CjwKCAiA8OjjBRB4EiwAMZe6y5_84V3ek15m17m45ZjUS8CJGN8CDmLdMHFmDUai5BTqkctyGuc0KBoCV8sQAvD_BwE

Wrong site

you found the right place right time buddy.. i know a lot of websites for repairs and manuals that can really help u..

Try ordering from the manufacturer.

Go to the manufacturers website, support, and user manual.

Did you try to press reset button?

I searched the internet and only saw Japanese.

no high voltage being produced have it checked out or buy a new one

notify sharper image

1: Press the button to turn off the screen.

2: Press and hold the down arrow button until an 02 appears in the Roof Temp, when you see the 02 appear remove your finger.

3: Using the button - short continuous pushes until you see 02 on the top (Roof Temp) and 5 underneath (House Temp) NB: The light should go off.

4: Press the and this will save your changes.