20 Most Recent Electrolux EL1022A Ergorapido 2-in-1 Stick / Hand Vacuum - Page 3 Questions & Answers

Check here https://searchmanuals.net/search7/?keyword=%2Bowners+%2Bmanual&gclid=CjwKCAiA8OjjBRB4EiwAMZe6y5_84V3ek15m17m45ZjUS8CJGN8CDmLdMHFmDUai5BTqkctyGuc0KBoCV8sQAvD_BwE

Pull off the front panel and look at the upper right, you will see two holes. One on top is the size of a pencil, and one below it the size of a dime. Use a paperclip, pen tip, ect and push the reset button in the center of the dime sized hole.

Support at Guardian https://www.guardiantechnologies.com/support From your previous question: the Replace HEPA filter light wont go off. Note: When you add information to a question, please use the Comment or Edit feature to add it to the same question, rather than opening a new question, because the new one has no link to the older one.

Check to see if there is a crack in the ceramic plate. If there is any type of disturbance where the metal is glued to it or you don’t have both leads on the metal it will not work

Its dirty and needs to be cleaned

Where can one get a new bulb ballast for the UV801?

Try it in google

I would verify that all the parts you removed are properly seated back in their exact locations. There is undoubtably a safety switch that is not properly closed. A door, a panel, or a latch that is not properly seated and closing the safety switch is probably the cause.

Try this site https://searchmanuals.net/search7/?keyword=%2Bowners+%2Bmanual&gclid=CjwKCAiA8OjjBRB4EiwAMZe6y5_84V3ek15m17m45ZjUS8CJGN8CDmLdMHFmDUai5BTqkctyGuc0KBoCV8sQAvD_BwE

There might be one here https://searchmanuals.net/search7/?keyword=%2Bowners+%2Bmanual&gclid=CjwKCAiA8OjjBRB4EiwAMZe6y5_84V3ek15m17m45ZjUS8CJGN8CDmLdMHFmDUai5BTqkctyGuc0KBoCV8sQAvD_BwE

Wrong site

you found the right place right time buddy.. i know a lot of websites for repairs and manuals that can really help u..

Try ordering from the manufacturer.

Go to the manufacturers website, support, and user manual.

Did you try to press reset button?

I searched the internet and only saw Japanese.

no high voltage being produced have it checked out or buy a new one