Top 20 ASUS P4P800-MX Motherboard Questions & Answers

https://www.manualslib.com/manual/444313/Asus-P4p800-Mx.html?page=38#manual Page 38 is the front panel 20 pin connectors; if you have a 10 pin, you don't have that model. I would search the manual I linked to for the motherboard picture so you can determine what the 10 pin really is.

theres many possibilities.... first check if loose connection of cables... also if it helps you might have to jumper hdd ...
and also try replacing cmos battery lastly make sure the chassis sensor button is pressed down when closin lid...

Use Google To Look It Up On The Internet!

ENGLISH PLEASE.

Hello try to download the manual here:http://www.asus.com/Motherboards/Intel_Socket_478/P4P800MX/#downloadPlease select your windows system.Next open the manual folder, and click on global for download.You will need adobe reader, to read the content.The problem could be the power supply failing, or bad capasitors on the mainboard:If the problem did not occur before the power outrage, i suspect the power supply failing.If you change the power supply, take antistatic precautions when working on the mainboard.Good luck

You have a problem with the Chassis Intrusion part, of the Asus P4P800-MX motherboard? http://www.asus.com/Motherboards/Intel_Socket_478/P4P800MX/#downloadThe Chassis Intrusion header is below the CMOS battery to the left.It is in-between the two black SATA connectors.It is a 4-pin header. From -> LEFT to RIGHT pins are numbered 1, 2, 3, and 4.Put a Jumper Cap on Pins 3 and 4, and bypass the Chassis Intrusion option.In the -> OS box, click on the blue Down Arrow. Now click on Windows XP.In the drop down list, click on the + sign to the left of Manual (5)Version E1880 - P4P800-MX user's manual (English version) E1880Click on the blue -> GlobalGo to Page 35. (PDF file page. Manual page is 1-25)Chassis intrusion connector (4-1 pin Chassis1)For additional questions please post in a Comment.Regards,joecoolvette

Mount the drive in the case and plug in the power and SATA (or IDE) connectors. You may need to purchase the SATA or IDE cables.There has got to be a YouTube Video for doing this. I am so certain that I am not even going to check that before posting this. It might not be specific to that exact mainboard but YouTube has everything!

Test your PSU or replace it if your power supply units fan is not working your PSU is faulty Test all leads that attach to your hard drive including electrical extensions IDE,SATA

the leads from your MOTHERBOARD TO YOUR HARD DRIVE make sure they have a secure connection and are not faulty or just replace them they could be faulty make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they could be faulty a computer needs its connections to continue its cycle and have an end so any faulty leads will end up with a computer error even something as small as a faulty electrical extension or fan lead can cause you problems

computers need all of the data and electrical current to travel through every working device and to have an end to be able work properly

make sure ram modules and cmos batteries have dust free secure seatings and cmos battery has charge some motherboards cmos batteries are soldered in

motherboard and a hard drive any leads between them will fail before your motherboard or your hard drive if its a flat ribbon 40 pin type IDE replace it this will be the first to fail

check all electrical power input and extensions make sure they are securely seated even the cd/dvd floppy drives need to have current go through make sure these drives are working

check you CPU make sure its securely seated and has thermal grease hope this helps

Check 12 Volt Motherboard VRM Section, Next Checek VRM Upper Mosfet or lower Mosfet one of them may b short.

Hi,There are basically 2 reasons why USB ports will not work besides being faulty.1. The drivers are not installed (inf files)2. The ports on certain motherboards can be disabled in the CMOS or BIOS setup.To check if the USB drivers are installed you can open control panel>device manager. Scroll down to "Universal serial bus controllers and make certain these are present and installed correctly.Also make sure your USB device is functioning properly by plugging in to a USB port on a different computer.Please let me know if you need any further assistance.Best wishes,Graemevm

Hello there, I will be your technician today. My name is Norman-Wynne Damstra.Welcome to Fixya!On the rear of the mainboard, called the Input/Output or I/O you will find a blue VGA port, this is your on-board graphics adaptor/graphics card. Therefore you may use this port to connect your monitor to.Alternatively if you are looking for a graphics card to fit your computer mainboard, you will need to install one that uses the PCI slot. That is the White slot. You may install the graphics card in any of the three available PCI slots.You could contact your computer store and ask them if they have a PCI graphics card, or search E-bay or the like for a PCI graphics card. Brands by Nvidia or AMD/ATI radeon will work. A Nvidia Geforce 5200 or 5500 may do the trick, usually 128mb versions.Take care!Norman-Wynne Damstra

I really dont think any Video Cards have a fuse on them that you can replace even on a video card that old. Can I ask why you would even be looking for one?

http://dlcdnet.asus.com/pub/ASUS/mb/sock478/p4p800-mx/e1880_p4p800-mx.pdf

You can download the audio and device drivers from ASUS WEB site.Select your model motherboard/computer/laptop, and make sure you select driversthat matches your Windows operating system. Please click on this link to theirWEB support site : -http://support.asus.com/download/download.aspx?SLanguage=en-us

Hello !
If you check out ASUS support, you will find this troubleshooter for the motherboard not booting :
1. Please clear CMOS.
2. Please take out your memory cards and video card, try to clean their golden connectors with a rubber, then reseat them back.
3. Please take the CPU cooler out, add some thermal paste to the CPU surface, then reseat the cooler back and keep the cooler tightly installed.
4. Please keep the necessary components(CPU, one memory) onboard for a test.
Finally, we would recommend you to replace a BIOS battery to have a test.
Also, by looking over beep codes I have found for AMI BIOS these problems for the 2 short beeps :
1. Memory parity error (Description : A memory parity error has occured in the first 64 KB of RAM. The RAM IC is probably bad).
2. POST fail (Description : One of the hardware tests have failed).
If you have done those and it still doesn't boot, let me know I'll try to find other solutions.
All the best !

the drivers might be installed properly for this device click start control panel administration tools computer management device manager scroll through all of your devices if you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver if you can see your usb device but its not working sroll to Ports(Com&Ltd) right click to update driver if you computer came with a motherboard disk the drivers could be on it

or you might have to download one http://download.cnet.com/asus-agp-v3800-series/3000-2108_4-10163292.html http://download.cnet.com/g02-cd33-a3-rar/3000-2098_4-200366.html if these drivers are not right http://download.cnet.com/2000-20_4.html on the home page you should see a search tab just type in what you are looking for (be precise)also the download software finder under that there will be a list place a tick in the box of any one you want/need all software windows software mac software mobile and web apps

http://majorgeeks.com/downloads35.html

also this link will provide you with many freeware and share drivers hope this helps you

first make sure the RAM is securely seated

Test your PSU or replace it if your power supply units fan is not working your PSU is faulty

One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect/ boot up a computer hard drive

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your "((motherboard to your hard drive))" make sure they have a secure connection and are not faulty or just replace them they could be faulty make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electrical extensions or just replace them they could be faulty a computer needs its connections to continue its cycle and have an end so any faulty leads will end up with a computer error hope this helps

Hello, You can download the driversfrom ASUS WEB site. http://usa.asus.com/index.aspx So please go there website For download copy bellow thelink and paste on address bar. http://support.asus.com/download/download.aspx?SLanguage=en-usSuppose, you need driver for, ASUS K8V-VM
Product =Mother Board So Series= (Socket NO.eg. 754 etc.) So Model= (Model no will be K8v-vm) And please select the O.S (XP / VISTA/ WINDOWS 7) version of the drivers that matches your P.C and search. Now you can download easilyone after one. after download all the driver ,unzip the fie with winrar or zip. Download the winrar free, copy the link and paste onaddress bar. http://www.filehippo.com/search?q=winrar Install it . Now right click on everydownloaded file and select EXTRACRT TO THE FILE FOR......,then create a newfolder with the with the driver file, you can install easily. Hope this helps.

You can download the audio and device drivers from ASUS WEB site.Select your model motherboard/computer/laptop, and make sure you select driversthat matches your Windows operating system. Please click on this link to theirWEB support site : - http://support.asus.com/download/download.aspx?SLanguage=en-us