Oregon Scientific BAR206 Wireless Weather Station - Answered Questions & Fixed issues

Hi,I always have trouble getting mine to work after changing the batteries, but I have just managed to get it going by doing the following:taking batteries out of main unitputting new battery in remote unit and pressing remote unit reset buttonre-inserting batteries in main unit and pressing reset button.i think the trick is to ensure that the batteries go in the remote unit first, then the main unit after that. It has taken me days to work this out!

Use a volt meter to see if the battery is depleted or not. If you replace the battery and the alarm stops then it was a weak battery, If it keeps on then there something setting it off. You can use the information in the owners manual Oregon Scientific BAR629HGU Manuals to troubleshoot it.

Heavens Kaitlan you don't ask much do you? I think you need to spend a happy hour or two online with each question, unless there's a Professor of Climatology reading this.

You may view the manual at http://personalcare.manualsonline.com/manuals/mfg/oregon_scientific/rar188abk.html

We are having the same problem

I have had this Oregon Scientific model RAR186 unit for years and it works great. The only issue I ever have is when the batteries need to be changed in the remote sensor unit (Oregon scientific model #THN122). It never fails that once I change the batteries that the unit does not send a signal to the base unit. I will often hit the reset button and change the channels on the remote sensor before I finally remember that you need to do the following to get the sensor to talk to the RAR186 base unit: On the base unit (RAR186), hold down the CHANNEL and MEM buttons for at least two seconds. You will then see a graphic appear above the channel number that shows that it is searching for the sensor. Within a minute, you will then see the temperature displayed for the sensor showing that they are communicating. This is buried in the manual that you probably discarded as did I. Apparently, if your sensor is broken, you can either search to find a new sensor of the same model or also use the following sensors: THC138, THGR122NX, or THN132N I have not needed to replace the sensor as once I found the instructions to reset the communication between the sensor and base unit, all was fine. Hope this helps someone. I wrote this instruction using a Sharpie on the inside cover of the sensor since you have to remove 3 screws to replace the AAA batteries (2) in hopes I will remember next time and not waste my time searching the internet and not find the answer. Good luck!

I have had this Oregon Scientific model RAR186 unit for years and it works great. The only issue I ever have is when the batteries need to be changed in the remote sensor unit (Oregon scientific model #THN122). It never fails that once I change the batteries that the unit does not send a signal to the base unit. I will often hit the reset button and change the channels on the remote sensor before I finally remember that you need to do the following to get the sensor to talk to the RAR186 base unit: On the base unit (RAR186), hold down the CHANNEL and MEM buttons for at least two seconds. You will then see a graphic appear above the channel number that shows that it is searching for the sensor. Within a minute, you will then see the temperature displayed for the sensor showing that they are communicating. This is buried in the manual that you probably discarded as did I. Apparently, if your sensor is broken, you can either search to find a new sensor of the same model or also use the following sensors: THC138, THGR122NX, or THN132N I have not needed to replace the sensor as once I found the instructions to reset the communication between the sensor and base unit, all was fine. Hope this helps someone. I wrote this instruction using a Sharpie on the inside cover of the sensor since you have to remove 3 screws to replace the AAA batteries (2) in hopes I will remember next time and not waste my time searching the internet and not find the answer. Good luck!

Hello,The message "error eep" is display on the main unit. I checked and changed the all the batteries, I pressed the reset button both on the main unit and on the outdoor unit and this message is still displayed. Can someone help meThanks

Check the batteries and then you can reset the device to detect all the sensors. If that does not work, contact the manufacturer for a replacement.

http://www.oregonscientific.com/us/en/Weather/Weather-Station-Parts

RAR232 manual

That is all you need to know - http://www.youtube.com/watch?v=LiomyqH-s0Q

I would suggest you move the transmitter and receiver closer together or into areas of the least physical obstructions.

Same exact features, buttons and functions as this manual by Irwin.

http://www.irwin.com/uploads/documents/36_laser_tape_25.pdf

I want to use an old sensor forgiven during 30 years. I have no more manual, off course. Thanks for your answer

It's possible that one of the newer sensors could work in place of your 1457 sensor, but it depends on the specifications of the newer sensors and the compatibility with your base unit. The I MAX1457 sensor, which is a highly integrated analog-sensor signal processor optimized for piezoresistive sensor calibration and compensation. However, I have no information about its compatibility. If you're looking for a replacement sensor, I suggest contacting the manufacturer of your base unit to inquire about compatible sensors. Alternatively, you can check the user manual of your base unit to see if it lists compatible sensors. Garage door opener sensors are not universal. Safety sensors can only communicate with garage door openers from the same brand.

Unlikely unless you know the secret maker name and can find them in China. At the moment, no one has heard of it apart from here on Fixya. All questions need FULL 'make model (what it is)' please. https://www.google.com/search?q=dse+z111 ..

1. Access the Time Setting Mode:
   • Locate the 'Set' or 'Settings' button on your weather station. This button is typically found on the front or the back of the unit.
   • Press and hold the 'Set' or 'Settings' button for about 3 to 5 seconds. This action should access the time setting mode, where you can adjust the time.
2. Adjust Hour and Minutes:
   • Once in the time setting mode, use the 'Up' or '+' button to increase the hours and the 'Down' or '-' button to decrease the hours.
   • After setting the correct hour, press the 'Set' or 'Settings' button again to move to the minutes setting.
   • Use the 'Up' or '+' and 'Down' or '-' buttons to adjust the minutes accordingly.
3. Confirm the Time:
   • Once you have set the correct time, press the 'Set' or 'Settings' button again to confirm and exit the time setting mode.
4. Check the Time Display:
   • After setting the time, check the display to ensure that the time is displayed correctly.

Question edited for clarity. Question moved from Motorcycles category. Of course not! You will burn out all the electronic components. You can't just double the voltage. Conversely you can't put a 1.5 volt battery in place of a 3 volt one. Get the proper battery. https://www.starrett.com/contact-us# ..

Ascot weather station manuals

Manua.ls https://www.manua.ls > Ascot > Weather station You are currently on the Ascot weather station manuals page. Choose one of the products to go directly to the manual for this product.

Ascot weather station user manual

Manuals.co.uk https://www.manuals.co.uk > Ascot > Weather station For those looking for a simple and straightforward setup, Ascot Weather Stations provides a quick start guide with step-by-step instructions to get you up and ...

User manual Ascot AUK-WS-32 (English - 6 pages)

Manua.ls https://www.manua.ls > weather stations > Ascot To install and set up the Ascot AUK-WS-32 weather station, you should begin by securely mounting the sensor unit in an elevated outdoor location, ensuring it is ...

Ascot GT-WS-06s user manual (English - 40 pages)

Manuals.ca https://www.manuals.ca > weather stations > Ascot User manual. View the manual for the Ascot GT-WS-06s here, for free. This manual comes under the category weather stations and has been rated by 2 people ...

Ascot Weather Station User Manuals Download

ManualsLib https://www.manualslib.com > Brands > Ascot Manuals Download 1 Ascot Weather Station PDF manuals. User manuals, Ascot Weather Station Operating guides and Service manuals ... Operating Instructions Manual.