20 Most Recent Canon MultiPASS F80 All-In-One InkJet Printer - Page 2 Questions & Answers

The Canon Multipass F80 Printer Manual is available to download here
http://www.fixya.com/support/p360702-canon_multipass_f80_all_in_one_inkjet
Look for it midway down the page.

Download it from here www.soft32.com/download_176633.html

When your printing? thats the problem? Remove the USB cable then turn off the printer, then turn on it again and plug in the USB cable on the USB port. See what will happen?

This works on the F30, F60, and F80.
Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key. I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

You can call Canon at 1-800-ok-canon

And see if the F80 has a Windows 7 Driver. I am a certified Canon tech but i could not find any information on the F80 having a driver.

Best of luck..
Have a Happy and Safe Holiday Season...

Inkjet printers do not like being left unused for long periods.
The print head may be blocked. Try several deep cleaning of the print head to see if it can clear the blocked print nozzles.
If none of this works then the print head needs to be replaced. A new cartridge will not solve this problem.
NOTE the print head is not a cheap item, you may consider putting the money towards a new and better printer.

First thing I would recommend is to uninstall the printer and reinstall it with the latest drivers available from canon which you can find here:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/multipass_series/multipass_f80#DriversAndSoftware
Just click on drivers and software if not already on that page and select your operating system.
I would next print a test page and see if that does it as well.
Thank you,
Lee

I don't know what your original problem was but you might try going to Canon's website. it can be found here:

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/multipass_series/multipass_f80

Hi you can try this.

To reset waste tank full error in MP730.

1. Hit the "menu": Key
2. Hit "Copy" Key
3. Hit "#" Key
4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading
5. Hit the "3" button- this will bring up Eprom Clear
6. Hit "0" button
7. Hit the "Stop" button

Can only try then your printer go on longer but some time the other you will need to clean out the waste ink it inside the printer all got to be open up to do this.


Ok I have put a MP-Tools in my website for you to try out this tools are for reseting your inks plus it can do much more.

Click on the link to download it.

Click Link = http://www.4all2sell.com/reset-tools/MPTool.exe


Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.

All The Best: Pineworks

Cannon Support ->link.

try this website:
http://www.soft32.com/download_176633.html
Be sure to choose the Mac tab

hi
its so hard
i prefer take it to a repair shop
it may be to damage lots of part

It sounds like the black ink nozzle is plugged. If you have done the nozzle cleaning and the problem persists, insert a new OEM black cartridge and rerun the cleaning utility at least 3x. This should clear the nozzle.
If you are using aftermarket or refilled cartridges, the chances are that the ink is not up to manufacturer specifications. This is a common problem. Return the cartridge to the vendor and either get a replacement cartridge or refund.
Let me know if this solves the problem. Thanks.

To set the receive speed
Change RX Start Speed Setting The message [START AGAIN] will appear if phone line conditions are less than perfect. Decrease the transmission (RX or send) speed if this message appears frequently on the LCD.

1. On the operator panel, press <Menu>.
   
   
2. Press the left '<' or right '>' arrow repeatedly until [USER DATA] appears.
   
   
3. Press [Set].
   
   
4. Press the right arrow repeatedly until [FAX SETTINGS] appears.
   
   
5. Press [Set].
   
   
6. Press the right arrow repeatedly until [RX SETTINGS] appears.
   
   
7. Press [Set].
   
   
8. Press the right arrow repeatedly until [RX START SPEED] appears.
   
   
9. Press [Set].
   
   
10. 1. The factory default RX (send) Speed is 33600 bps.
       
    2. You can select from the following RX Speeds:
       14400 bps
       9600 bps
       7200 bps
       4800 bps
       2400 bps
       
       
11. Press the right arrow to display the applicable RX Speed.
    
    
12. Press <Set>.
    
    
13. Press <Stop> to return to standby mode.

To Set the Send Speed

Change TX Start Speed Setting The message [START AGAIN] will appear if phone line conditions are less than perfect. Decrease the transmission (TX or send) speed if this message appears frequently on the LCD.

1. On the operator panel, press <Menu>.
   
   
2. Press the left '<' or right '>' arrow repeatedly until [USER DATA] appears.
   
   
3. Press [Set].
   
   
4. Press the right arrow repeatedly until [FAX SETTINGS] appears.
   
   
5. Press [Set].
   
   
6. Press the right arrow repeatedly until [TX SETTINGS] appears.
   
   
7. Press [Set].
   
   
8. Press the right arrow repeatedly until [TX START SPEED] appears.
   
   
9. Press [Set].
   
   
10. 1. The factory default TX (send) Speed is 33600 bps.
       
    2. You can select from the following TX Speeds:
       14400 bps
       9600 bps
       7200 bps
       4800 bps
       2400 bps
       
       
11. Press the right arrow to display the applicable TX Speed.
    

You can download a copy of the user manual for the F80 at
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=334&modelid=7175

Please make sure to rate this solution. Thanks.

1. Press <Set>.
   
   
2. Press <Stop> to return to standby mode.

sounds like there's something caught on the ink cartridge head. go to the canon ink cartridge information webs site to see if there is an answer there or in the manual that came with the printer. good luck

Are you using Windows Vista or Windows 7? If so, the driver download page at Canon does not provide drivers beyond XP. Otherwise, go back to the XP (or earlier versions) driver downlaod site and download the MultiPASS F80 Software User's Guide. That may provide the answer to your problem. Also, if you are using unpopular, proprietary software programs the driver may not recognize the commands. Good Luck!

go here you have to use the xp drivers they dont have windows 7 yet
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=334&modelid=7175

Hi there
There no easy way the printers are been made this way so you take them to the shop, but if you are handy with your hands and know what you are doing then you will need to take all apart and take out the ink pads inside the printer and clean them up make sure they nice dry when put back in, then you are going to need a program that you can find on the internet it will be called waste reset tools, or your printer will not work even after you done the clean out.

I am not sure what canon you have so I cant tell you the tools you need for yours, i have got canon MP-Tools on my website if this is the one you need.
with this you can reset the waste ink tank before you do the clean out but remember in time you will need to clean out or it going to be a big mess of ink comming out your printer.

Click Link = http://www.4all2sell.com/reset-tools/MPTool.exe

All I ask is please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

All files on my website are only there for a limited time