20 Most Recent Canon imageRUNNER 3300 All-In-One Laser Printer - Page 4 Questions & Answers

error code E000002-0000

how the error code E000000-0000 is solved...give the solution

Hi, if E00000-0000 error is appearing on the screen it indicates that the FILM-ASSY of your printer has been damaged and need to be cahnged. So, call up your nearest service station and ask to change it.

24 volt output from composite main power supply is absent. Could be main power supply or DC controller PCB

ese are all list of error code in Canon iR5075

• n cause: the main thermistor (TH1) has poor contact or an open circuit.The thermal switch (TP1) has an open circuit.The fixing heater has an open circuit.The SSR is faulty.The DC controller PCB faulty.Mode of detection: 0000 after the main power switch is turned on,the temperature detected by the main thermistor does not reach 70?C.

Caution: The error must be be reset in service mode (COPIER>FUNCTION>CLEAR>ERR)

• E001

Main cause: The main thermistor (TH1) has a short circuit.The sub thermistor (TH2) has detected overheating.The SSR is faulty.The DC controller PCB is faulty.Mode of detection:0001 The main thermistor or the sub thermistor has detected about 230?C or higher for 2 sec.0002 The main thermistor has detected 230?C or higher (hard circuit detection)0003 The sub thermistor has detected about 236?C or higher. Caution: The error must be be reset in service mode (COPIER>FUNCTION>CLEAR>ERR)

A) Black Streaks, Shadows, And Ghosting
Adjust the printer's lightness/darkness setting to 2-3 different variables and see if problem disappears. Look at the fusing assembly - is the roller torn or does it have any black buildup? Use caution!!! It gets HOT!

Try another toner also.

E000225-0000

check if the fan is working properly

dear i believe it would strongly recommend you to take your device to one of the company brunches and never ever mess with the device system>

If the error 602-003 arise in IR - 3300, Than what to do, is it necessary to format the hard disk ? If, so , pls. let me see , how to format the hard disk ?Thanking you