20 Most Recent Canon PIXMA iP2000 InkJet Printer - Page 3 Questions & Answers

Hi this is what i found for your problem hope it helps thanks. Paper feed cam sensor error or Error Code 6B10
Condition: An error occurred in the paper feed cam sensor during paper feeding from the cassette, or the paper absorbing a large amount of ink jammed in the PF rear guide.
Problems and Solutions:

• Jammed paper in the PF rear guide (when a large amount of ink was absorbed in the paper);
  - remove the jammed paper and foreign material.
• check for foreign material or paper debris in the cassette or in the PF rear guide;
  - remove foreign material.
• If other solution fail, replace one off the following part
  - PF pick-up unit
  - Logic board

the printer head of the printer is separated from the ink cartridges, after removing the ink you can remove the head, pull the latch upward so the head will pop out then pull it out, wipe the copper connector with a clean cloth be sure not to touch it, check for smudges in the connector wipe it dry then put it back gently on the cradle, on the printer open the cover make sure it initialize then stay in the middle, insert the ink again, hope this work

Hello.

You can download it at this link:

Canon

Once you open the link above, scroll down the page and click "Guides and Manuals" then click the download beside"iP2000 User's Guide for Window"

A new window will open, scroll down and click "I agree - begin download" then save the file.

Hi,

Turn off printer, unplug power cord and usb or parallel/usb cables .
wait for 15minutes and connect all cables back on then turn power on.
it should work if it does not work then seems you have problem with
head/logic board so that needs to be replaced.
if that's case, better see printer Tech to have the part replaced.

Thank youfor visiting FixYa! We answer yourconcerns promptly for FREE. Please spare a few seconds toclick on YES button in return. Havea good one!

OK, since nobody answered my plea for help, I merely opened the Canon monster and yanked out the printhead after lifting up the lever. (WHAT was so hard about that, that nobody could explain it here?!)
Cleaned printhead using warm water & ice-cube tray & paper towels. Just let it soak all the excess ink out for a while, then allowed it to dry.
Changed cartridges, put new color cartridge in...
HOWEVER!!
THE DA*NED THING STILL WON'T PRINT YELLOW (altho it will print a faint hint of yellow). WHY IS IT DOING THIS?
Why is Canon marketing such a piece of cr*p that the end-user cannot maintain it? Canon USED to be a quality name-brand.

OK, since nobody answered my plea for help, I merely opened the Canon monster and yanked out the printhead after lifting up the level. (WHAT was so hard about that, that nobody could explain it here?!)
Cleaned printhead using warm water & ice-cube tray & paper towes. Just let it soak all the excess ink out for a while, then allowed it to dry.
Changed cartridges, put new color cartridge in...
THE DAMNED THING STILL WON'T PRINT YELLOW (altho it will print a faint hint of yellow). WHY IS IT DOING THIS? Why is Canon making this a common problem in the first place, rather than producing a product that is reliable and easy to maintain?

Try this : start > control panel > printer and faxes > icon canon printer right click choose properties then click maintenance > you can see there icon of nozzle clean and printer head cleaning just click read step by step.

Follow the next steeps to reset:

If I could be of further assistance, let me know. If thishelps or solves the issue, please rate it and give a testimonialfor my response.

Pixma IP2000
1. Turn off printer.
2. retaining button Resume/Cancel press button POWER - indicator it will catch fire by green color.
3. let go button Resume/Cancel, continuing to retain POWER.
4. press button Resume/Cancel of 2 times, retaining POWER, after which let go all buttons.
5. when indicator will be lit BY GREEN - press button Resume/Cancel of 4 times!!!
6. turn off printer by button POWER.
It is undertaken from service manual.

WHen you send a document or picture to print.

Do not press print inmediately. Go to the printer options and verify the settings.

Is it usually on the setting where says GRAYSCALE on Advance Options..

God Bless You!!

Turn the printer on.
Lift the cover, to expose the print-head.
Let the print-head slide away from its "resting" position,
which is immediately above the waste-ink absorber.
Unplug the printer, to cut the AC power.
Put on a pair of surgical gloves -- ink on your hands is bad.
Take some soft single-use towels, and push them into absorber, to "stuck" (without the "t" -- this web-site bans the use of the word s*ck) the waste-ink out of the absorber.

Just click the link bellow and download the resetter software and use it carefully.
freeresetterprinter.wordpress.com/200
Thank you.

Waste Ink Counter Reset:

Step 1: Manual for Service mode
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

step 2 : Software for Permanent
1. Reconnect the printer cable.
2.Open General Tools software and select (USB PORT)
3 .Choose (SET DESTINATION 1) And it should be reset.
"After service mode Pls use software for permanent reset"



Hope that helps! Should you have any further questions,please feel free to post them here.

P.S. - If you find that the solution/answerI provided led you to, or resulted in a fix, please close the ticket with a FixYa!rating. I would be very grateful for your show of appreciation.

Thank you for using FIXYA!

Cheers!
IrishDruid