20 Most Recent
Canon MultiPASS MP390 All-In-One InkJet Printer - Page 2 Questions & Answers
I have a multi pass MP 730. It stsrted to say
Take a look at my tip on cartridges it may save you a lot of time and money
http://www.fixya.com/support/r3845491-ink_cartridge
OR
Read on and see if any applies to you.
Check that you removed the protective tape. some cartridges have two of these pieces of tape one over the head and possibly on on the contacts to the printer.
If you recently re-filled or had the cartridge refilled or even bought one of the many cheaper replacement cartridges you should read on
Most modern cartridges have an ink level chip built on to them.
Should the level drop below 25% then most of these chips lock up and will not reset.
Re-filling them will have no effect
If you are lucky you should be able to find either a chip resetter around on the INTERNET or maybe even local
OR
Even better empty cartridges that never need to be reset.
The second option is my preference
I realise these are not for your specific printer but there are others listed on both those sites as well.
cheaper cartridge problems have been on the rise recently and that is for ALL makes of printer.
If you try to clean the contacts be VERY careful cleaning contacts and ONLY use isopropynol on a lint free bud or cloth.
Also be very gentle.
I have seen the contacts cleaned and cartridges ruined with other methods of cleaning.
Rubbing too hard can also cause a badly set chip to move making it inoprable.
I dont like full prices replacements either which is why I always provide the links
I usually reccomend that people take back any cartridge that does not work right from the get-go.
I dont know of anyone who has had a problem doing that be it a shop refill or otherwise.
No matter if I paid $1 or $100 for a cartrdige I would still expect it to work
Hope this gives you the information you need
Bob
EXMod
It would be very decent of you to consider the quality of our experts answers and judge them accordingly as you pass through FixYa.
Thank you
I have a printer without
Dear jima,
Go to the canon site/ support. type your model number there and it will show all drivers for your printer. select the operating system and download driver. install it and your printer will work.
thanks.
How do I scan with
1. Check your computer button one by one. You will find Scan button. If you press scan button your printer will start to print. thanks
I have a canon mp390.
HI there.
You need to have a USB cable to connect the printer to your laptop. Also, you need the driver installed. Click on this
link for the printer driver. Make sure to choose the right Operating System.
If you need the manual, you can also get it from the link. just click on MANUAL.
If you need further assistance, please let me know.
Thank you for using Fixya!
Not finding what you are looking for?