20 Most Recent
Yamaha EF4500iSE Generator 4500 Watt Inverter Series Trailer Camper RV - Page 3 Questions & Answers
Model ef6600de. How do I decrease rpm?
Search Results
www.yamahamotorsports.com/assets/.../0/LIT-19626-01-15_1425.pdf
Generator. LIT-19626-01-15. 7WV-28199-11. EF4000DE. EF5200DE. EF6600DE ...This manual will provide you with a good basic understanding of the operation and .....card listing your Yamaha model name, engine ... rpm. NO OTHER ADJUSTMENTS NEEDED. ENGINE OIL: IDLE SPEED: ..... Electric Starting Model:.
www.gen-tech.net/fullpanel/uploads/files/theory--diagnostics-guide.pdf
Yamaha Generator Theory and Diagnostics Guide .... Conventional EF6600DE . ...models with Smart Throttle) do not rely on rpm to ... unit manages functions such as AC power modifica- ... tions means higher fuel economy at lower outputs.
12/26/2015 12:33:48 AM •
Yamaha...
•
Answered
on Dec 26, 2015
How to fix generator need full choke to run
If you have not properly shut down the unit after use you will have likely had fuel remaining in the carburetor. The fuel will have evaporated while the unit was stored leaving residue behind. This residue will plug and interfere with the fuel passages and metering orifices of the carburetor. The residue reduces the fuel flow through the carburetor. Applying the choke compensates for the reduced fuel flow returning the fuel air mixture to a burnable ratio. If the unit runs with the choke on it is likely the carburetor is dirty. Be running the engine the carburetor will possibly clean itself. Make sure you remove any old fuel from the machine and replace with fresh. Allow the unit to run for an extended length of time attempting to return the choke to the run position. If you are able to return the choke to the run position you are on the way of solving this problem. You may need to run it additional time to completely purge the residue.
Additives are available to clean the carburetor and as a last resort if running with fresh fuel doesn't' return the motor to normal you may try it. For best results after mixing and running with the additives leave the unit overnight which may help to remove the remaining residue.
The shelf life of gas containing ethanol is about 30 days. In the future it is best to run the unit dry leaving ot fuel in the carburetor.
All else fails you will need to have the unit serviced by a small engine service center.
11/19/2015 9:01:54 PM •
Yamaha...
•
Answered
on Nov 19, 2015
I have a Yamaha ef1000is generator for less than a year.
WhenI push in the choke after starting it shuts down
If you have not properly shut down the unit after use you will have likely had fuel remaining in the carburetor. The fuel will have evaporated while the unit was not in use leaving a film behind. This residue will plug and interfere with the fuel passages and metering orifices of the carburetor. If the unit runs with the choke on it is likely the carburetor is dirty. Be running the engine the carburetor will possibly clean itself. Make sure you remove any old fuel from the machine and replace with fresh. Allow the unit to run for an extended length of time attempting to return the choke to the run position. If you are able to return the choke to the run position you are on the way of solving this problem. You may need to run it additional time to completely purge the residue.
Additives are available to clean the carburetor and as a last resort if running with fresh fuel doesn't' return the motor to normal you may try it. For best results after mixing and running with the additives leave the unit overnight which may help to remove the remaining residue.
The shelf life of gas containing ethanol is about 30 days. In the future it is best to run the unit dry leaving ot fuel in the carburetor.
All else fails you will need to have the unit serviced by a small engine service center.
11/19/2015 8:52:58 PM •
Yamaha...
•
Answered
on Nov 19, 2015
Does the yamaha EF1000is inverter generator 1kva
it seems to be the standard that the rating or model ??1000 or ??1500 or ??2500 or ??5000 or??5500 or ??6500 is the kv rating of the gen-set regardless of straight or inverter
so if yours is EF1000 it will be 1000 watts or 1 kv
remember that most electric drills are 1000 watt units so a unit this small is mostly good for lights, charging batteries, small compressors for tyres
7/4/2015 9:50:39 AM •
Yamaha...
•
Answered
on Jul 04, 2015
Generator burning oil
Regardless of it being either a two or four cycle engine the piston rings are at fault, if not the cylinders having scratches or groves
2/22/2015 4:49:40 AM •
Yamaha...
•
Answered
on Feb 22, 2015
Low voltage
Most generators use a flyball type governor within the engine to control rpm; also there is a voltage regulator that tries to maintain voltage at about 115v. The voltage regulator varies the voltage to the armature increasing /adjusting magnetic force. Use a meter with htz or freq setting to adjust engine governor to 60 cycles. When the generator is producing 60 cycles, the engine should be turning 3600 rpm, max power range. At 3600 rpm the voltage should be 115 to 120 volts. Loading the generator will cause governor to try to maintain 3600 rpm. Check engine manual for proper adjustment of gonvernor and linkage. The governor mech should last the life of the engine, however governor system does wear out. Expensive repair. enjoy
9/26/2014 2:04:39 PM •
Yamaha...
•
Answered
on Sep 26, 2014
Not finding what you are looking for?