20 Most Recent Carrier 42QG24-C / 38QG24-C 24000 BTU SPLIT AIR CONDITIONER FOR 220 VOLTS ONLY - Page 9 Questions & Answers

Replace wand or take it apart and clean trigger and seat

as it is only a few months old take it back for a warranty repair or refund there should be at least 6 months warranty

you have a bad controller. you can have it replaced or and Atlas Copco tech may be able to program it. If not your only option is to replace the controller.

you can find anything you need at discount prices here>>www.discountbargainprices.com

go google and type in-- manufacturer of central pneumatic framing nailer -- you may be able to leave out the framing word as the company will make more than one unit

I need the plastic air hose with the fittings. i'll really appreciate any help.

GOOGLE IT ONCE

sometimes the nozzle will not press open the shrader valve on the tire air stem

That is exactly what you will get, There are no repair parts. buy oil lubed compressor. be aware that the comp may not deliver enough air at high pressure for task. MCGRAW 21 gallon 175 PSI Oil-Free Vertical Air Compressor CENTRAL PNEUMATIC 29 gallon 2 HP 150 PSI Cast Iron Vertical Air Compressor

maybe a hole/tare in diaphram

You did not post the information on the tool but the air pressure has a direct effect on the depth that the nail is driven to.

Is the regulator adjusted for required pressure if so then sound like regulator, order rebuild kit.

Nozzle dirty or worn.

looks like this one with just a different branding? https://www.alltradetools.com/pdfs/new/archive/Powerbuilt-HotRod-5-Gal-Air-Compressor_647376_eng.pdf ..

whith serial number I can provide the wiring diagram

what is the size of motor? what is model number of compressor unit?

Try these people https://oemaircompressor.com/webster-air-compressor-parts.aspx ..

"Swingline Whammer requires too much pressure" I found a picture of the package on Etsy. The instructions there tell you to push the power lever forward with one hand, then lean on the handle with your body weight with the other hand. They specifically mention that it's too hard to squeeze, by design.

If you reduce the supply pulley diameter, yes.

pressure switch fail