20 Most Recent Konica Minolta Bizhub Press C6000 Copier - Page 8 Questions & Answers


You cleared the code in service mode?

Konica Minolta... | Answered on Feb 18, 2019


where and what jam code

Konica Minolta... | Answered on Feb 18, 2019


Did you open both middle sections ? check that the bottom middle section bottom is properly closed

Konica Minolta... | Answered on Feb 18, 2019


Align the ADF to the machine itself

Konica Minolta... | Answered on Feb 18, 2019


Turn off the machine, remove the toner bottle, then power on with the bottle out let the machine do its start up procedure. one it asks for the toner bottle install it correctly

Konica Minolta... | Answered on Feb 18, 2019


You have a problem with the HDD (Hard Drive) Main Memory Stick or the extra one if installed or worse case the Multi Function board. Have tech come out

Konica Minolta... | Answered on Feb 18, 2019


Tri-folder motor malfunction. or bad motor

Konica Minolta... | Answered on Feb 18, 2019


Clear the same way you accidently cleared the M2 except select web counter assumimg you replaced the web roller in the fuser unit

Konica Minolta... | Answered on Feb 18, 2019


you found the right place right time buddy.. i know a lot of websites for repairs and manuals that can really help u..

Konica Minolta... | Answered on Feb 05, 2019


Bizhub 164 (M2) error

Konica Minolta... | Answered on Jan 28, 2019


Hi

C-2a03 is a magenta toner cartridge eeprom access error. You can clean the connections between the toner cartridge and the machine if dirty. Try reinstalling the toner cartridge, if the cartridge is bad it should be replaced, if the cartridge is fine then the PWB-M should be replaced. Hope this helps...please post back for further assistance.

Daniel

Konica Minolta... | Answered on Jan 19, 2019


C-2704 - Charging corona/K
Replace the Black Charging Unit.

Konica Minolta... | Answered on Jan 19, 2019


The erase lamp (EL) is unconnected, was some recently working on the image unit? If so they for got to connect a small connector that provides power to the Erase lamp. OR the lamp is burned out, remove the image unit remove assy. above the drum do not touch the drum. pull up from both end at the rear should be to connectors are they connected? Erase lamp is on that assy. LEDS array along the axis.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 15, 2019


to what

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jan 14, 2019

Not finding what you are looking for?
Konica Minolta Bizhub Press C6000 Copier Logo

Popular Tags

53 questions posted

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6850 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

George Mclaughlin

Level 2 Expert

364 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Konica Minolta Office Equipment & Supplies

  • Konica Minolta Office Equipment & Supplies

Most Popular Question

please set replenish toner unit

  • Office Equipment & Supplies
Loading...