20 Most Recent Konica Minolta BizHub C252 - Page 6 Questions & Answers

press utility-stop-00-stop-01 press enter

hi find link for 226 https://www.youtube.com/watch?v=Ty3xLjyI-lE

c452 . forgot the "C" did you RTM firs, read the manual the do all tests and calibrations on it or self cleanings if all that fails it needs service (call for service) does the menu in the printer have self test page that 99% have./ do that yet?

magicolor 1600W User's Guide

https://www.bhphotovideo.com > lit_files PDF 2 Right-click the KONICA MINOLTA magicolor 1600W printer icon then ... Display Configuration Page-Displays the configuration page. In addi-. 125 pages Videos as well https://www.google.com/search?q=print+a+configuration+page+on+the+Konica+Minolta+Magicolor+1600W ..

Question edited for clarity. It is a generic 'fuser temperature" issue.

How to Fix error code C3425 in your Konica Minolta C224e

https://www.coronatechnical.com > 2019/05 > how-to-f... The fixing error C3425, c3722, C3725, and C3825 code refers to a copier Fusing warm-up trouble; the warm-up is not completed even after the set time has elapsed ... ..

https://www.fixya.com/support/t29847190-s_error_code_c_2554_konica_minolta

https://printcopy.info/?mod=erc&brand=Konica-Minolta&model=bizhub%20C220&code=C2554

try re-installing printer driver - see if any more up to date printer driver exists for the operating system ? and the printer model number ?

https://www.fixya.com/support/t25970268-ram_pack_in_minolta_copier_6001

I encounter same problem i test the Operation Board and its fine when i replaced the PWB- MFP Assy. Part number A1UDH02102 and it works! The display came back.

Maintenance call (m2) call service

Sir/Mam, Have you had the developer and drum replaced recently, or does the screen say Replace PC Drum? There are certain house chores the copier does before "Ready to Copy" it is waiting for them to get done, so that equals "Please Wait". One big item is making sure the developer and toner are properly mixed inside the image unit underneath the drum or next to it depending on the series. Might want to have the developer replaced and drum/cleaning blade normally done all together, then run the F8 procedure/Developer Charge, and make sure the counters where cleared. Did you recently replace the drum and the developer if so did you clear the counters for the drum and developer, FIRST? IF not then the copier thinks the new drum and new developer are old. The copier works on the counters that is how it knows it got a new drum and developer. Get new developer and a new drum and have it installed correctly. Counters are clear before the unit is yanked out of the machine, then you remove the image unit/drum unit replace the developer/drum and cleaning blade. (DO NOT USE A VACUUM CLEANER WHEN REPLACING THE DEVELOPER static electricity can destroy the sensor located below the developer unit. Then reinstall and RUN F8/Developer Charge. Make sure the fax line and Ethernet cable is removed can't print anything until the F8 is run. Or you will start all over again with new developer and a new drum. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Try to Troubleshoot By SWITCH ON MACHINE FROM MAIN POWER SWITCH BY PRESSING UTILITY BUTTON. -WAIT AND KEEP HOLDING UTILITY BUTTON -AFTER 10 TO 15 SECOND, TROUBLERESET OPTION WILL APPEAR ON SCREEN, TOUCH IT AND SWITCH OFF. -NOW ON NORMAL WAYS. if not ok, then check the panel connection. - after switching off and on, wait and observe if it display KONICA MINOLTA SCREEN OR Hour Glass symbol. and let me know for further diagnostic.

The error code C0202 indicates paper jamming in tray 1, C-O204: Tray-2, C-0206: Tray-3, C-0208: Tray-4. First of all, power off and unplug your copier, then empty paper from the problem tray and from the tray below it. Take out the problem tray, now you can see a paper jammed.

how to fix trouble code C-0202 error code in Konica Minolta ...

Videos as well https://www.google.com/search?q=Konica+Minolta+Error+Code+C0202 ..

Check the yellow drum sensor and developer unit. Per service manual:

1. Output the test pattern to check whether the uneven density occurs on Y toner area.

2. Check the intermediate transfer belt, and clean/replace it if there is toner image or damage

3. CAUSE: The histogram processing of the Y toner has terminated abnormally on the color registration sensor /Rr (PS85).

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

There is only 3 service mode password the easiest way to find it try the 2 and the other 1 tomorrow so it will not lock. 1) 11111111 2) 00000000 the last 3) 12345678. You dont have to go to [Utility] ... etc its a long process w/c you can see the service mode password/ change.

Here's how to fix: http://servicekonicaminolta.blogspot.com/2012/03/error-code-c0500-and-c0501.html

The code means there is some problem that requires a service technician to solve.

The fuser runs hot. Clear the paper jam and all should be good.

Make sure one of the staff hasn't swapped the toner cartridges around for a laugh. It's a business machine, you need professional servicing. https://konicaminolta.ca/en/business/support On a computer connected to it, go into Settings - Maintenance and look at cartridge levels. https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk01xIsKKGLL8DUOahhqPbBvvTrbL7w%3A1610146667380&ei=a-P4X4rRFv6i5NoP8f-0qA0&q=Konica+Minolta+c280+not+printing+magenta ..