Printcopy.infohttps://printcopy.info > model=Di2510
Code: C0045 · Description: Cooling Fan Failure The Cooling Fan Motor Lock signal remains set to H for a set period of time while the Cooling Fan Motor is ...
What is error code c2557 on Konica c220?
Check the toner bottle to ensure that it is feeding toner into the sub hopper unit under the bottle. Sometimes users will insert the bottle incorrectly and not lock it properly in place...the lever on the front of the toner hopper for that bottle is moved down to the left to remove and insert the bottle.
Dec 28, 2010
All in the link. You can't Scan FROM a USB drive because if it was on the USB Drive it is already in digital format. You can Scan TO a USB Drive.
For the faint text, remove the toner cartridge and give it a couple of hard taps on the either end to settle the toner. Then run a Test Page
https://www.google.com/search?q=Minolta+Bizhub+220+scan+or+print+from+flash+drive
..
You can try it, but the manual says 10 at a time via the Bypass tray. The problem is the fact that normal paper from the trays takes a rather tortuous route through the machine that contains sharp turns. By far the easiest way to print a lot of envelopes is to use Avery 8163 Labels. Use the Avery template and create the pages of addresses and print 50 at a time from the normal paper tray.
https://www.google.com/search?q=Konica+Minolta+Bizhub+880+print+9+x+12+envelopes
Question edited to add English make and model.
Question moved from Cars and Trucks category.
English only on Fixya please. We are a North American website.
Reset maintenance minolta dialta di152.
Cruet of oil.
And this is the problem. Copiers have a 'cruet of oil'? And they do!
https://www.google.com/search?q=minolta+dialta+di152+oil+tank
..
If you have already replaced the charging corona, developer powder, and cleaned the laser unit, but the problem of a white light appearing on the artwork persists on your Konica Minolta Bizhub C454, here are a few additional steps you can take:
Check the transfer belt unit: Ensure that the transfer belt unit is clean and free from any debris or toner particles. You can gently wipe it with a clean, lint-free cloth. If the transfer belt is damaged or worn out, it may need to be replaced.
Inspect the imaging unit: Check the imaging unit (drum unit) for any signs of damage or wear. Make sure it is properly installed and securely seated in its designated position. If the imaging unit is defective, replacing it might resolve the issue.
Perform a density adjustment: The Bizhub C454 usually has a density adjustment function. You can access this in the device's settings menu or through the control panel. Performing a density adjustment might help improve the print quality and reduce any unwanted artifacts.
Check the print settings: Ensure that the print settings on your computer or the printer's control panel are appropriate for the artwork you are printing. Adjust the print quality, resolution, and any color settings as needed.
Update the firmware: Visit the Konica Minolta website and check if there are any firmware updates available for your Bizhub C454. Updating the firmware can sometimes address software-related issues that may be causing the white light problem.
If none of these steps resolve the issue, it is recommended to contact Konica Minolta's customer support or a certified technician for further assistance. They will have specialized knowledge and tools to diagnose and fix the specific problem with your machine.
There are several reasons why your Konica Minolta C250i printer may be printing magenta as yellow. Here are some troubleshooting steps you can try:
Check the magenta toner cartridge: Make sure that the magenta toner cartridge is properly installed and has enough toner. If the toner cartridge is low or empty, replace it with a new one.
Clean the printer heads: Use the printer's cleaning function to clean the printer heads. This can help remove any clogs or buildup that may be preventing the magenta ink from flowing properly.
Check the printer settings: Check the printer settings to make sure that the correct paper type and color settings are selected. If the printer is set to print in grayscale or black and white mode, it may not use the magenta ink.
Perform a firmware update: Make sure that your printer has the latest firmware installed. Sometimes firmware updates can fix issues with printing quality.
Contact Konica Minolta support: If none of the above steps solve the issue, you may need to contact Konica Minolta support for further assistance. They may be able to diagnose the issue remotely or send a technician to your location.
If you're experiencing an installation error with your Konica Minolta C224e drum unit, it may be caused by a problem with the drum unit's sensor. The sensor is responsible for telling the printer that the drum unit is correctly installed and ready for use.
Here are a few steps you can try to troubleshoot the issue:
Make sure the drum unit is properly seated in the printer. The drum unit should click into place when it is properly installed.
Check the drum unit's sensor for any debris or buildup that may be blocking it. Clean the sensor with a soft, dry cloth.
Check the drum unit's connector for any damage or debris that may be preventing it from making a proper connection with the printer. Clean the connector with a soft, dry cloth.
Try to reset the drum unit by unplugging the printer, waiting a few minutes, and then plugging it back in.
If the issue persist, try to replace the drum unit to a new one.
If these steps do not resolve the issue, it may be necessary to contact Konica Minolta customer support for further assistance.
Error code C-3151 on a Konica Minolta C8000 printer indicates a "Fixing Film Transport Motor Lock Problem." This error typically occurs when the flexing film is stuck or there is a problem in the film transport module. In order to fix the issue, the printer should be opened up and the fixing film should be checked for any obstructions. If the issue persists, the motor unit and flexing film may need to be replaced.
The problem you are experiencing with your Konica Minolta Bizhub C280 not accepting new print jobs after changing the K drum and developer, could be caused by several reasons:
The new K drum and developer might not be compatible with the printer, please check if the new parts are compatible with your specific printer model.
The print queue on the computer may be stuck or corrupted. You can try clearing the print queue by going to the control panel and searching for "printers" and then right-clicking on the Bizhub C280 and selecting "See what's printing" and then "Cancel all documents"
The firmware of the printer may need to be updated, you can check the Konica Minolta website for any firmware updates for your specific model.
The 500,000 page count that you mentioned, could be a "life counter" on the printer, some printers have a maximum page count before needing maintenance, so it might be related to the issue.
The issue may also be related to the print server. You can try resetting the print server or reconfiguring it, or you can try connecting the printer directly to the computer and see if that resolves the issue.
Sometimes, resetting the network settings on the printer can also fix the problem. You can try going to the printer's web interface and find the network settings, and reset them to factory defaults.
It is highly recommended to consult the user manual or the technical support of Konica Minolta for specific instructions on how to perform these troubleshooting steps and avoid causing any further damage.
