20 Most Recent Brother HL-2240 Monochrome Laser Printer - Page 9 Questions & Answers

usually with the disk that came with it .

Unplug from the mains. Pull it out, open all the doors, remove the toner cartridge and check for paper or pieces of paper. Clean the rubber feed rollers with soapy water on a cloth. They make 862 models, but yours should be here somewhere. https://www.google.com/search?q=fix+Brother+Printer+Paper+Jam ..

Parts #: X81375001 http://www.searspartsdirect.com/model-number/ul/t2003d/0150/1210000.html

tray this Tweaks, Rest by:- 1- disconnect from Power first unplug it from the power source, then unplug it from printer make sure its unplugged0 for at least 30 seconds. test it by adding 10 sheets for good rollers grip 2- if not work: _clean all rollers by dipping ear cleaner in water then one touch to dry cloth to remove water surge make sure to clean front and back rollers. hope it will work :)

https://help.brother-usa.com/app/answers/detail/a_id/145040/~/unable-to-print-e3

What is the model number

Page 26 of the manual refers https://www.brother-usa.com/-/media/brother/product-catalog-media/documents/2020/08/20/14/48/um_pt_320_340_en_158.pdf ..

To just change the font size, press and hold the Code button. Then press the 1 (! and Size) key several times until the desired character size is reached. Then release the Code key. See https://www.manualslib.com/manual/219240/Brother-P-Touch-Extra-Pt-320.html?page=29#manual . This works unless you are already using one of the Big fonts. However, the size of your label tape will limit the font sizes available. To change the font, press and hold Code and then press Font until you get the desired font. Release the Code key at this point. I hope this helps. Cindy Wells

Follow the instruction supplied with the downloaded installation/setup software from Brother.com

The picker is dried out and glazed.

When the latest version of firmware is installed, that overwrites the older version.

Check you have set it up as a fax machine, (outdated technology) and fax is enabled.

Go to devices and printers to see if your printer is set to default. Make sure the printer cables are plugged in tight. Offline means it is not getting a signal . In Case You Still Having Problem Then Follow Us For On : Brother Printer Support

Sir/Madam he following error messages will continue to appear if the drum counter was not reset when you replace the drum unit with a new one.

• Replace Drum
• Drum End Soon
• Drum Near End
• Drum Stop

To clear these error messages, you need to reset the drum counter, Or Visit official Brother Printer website For Brother Printer Troubleshooting Page Url Below:http://welcome.solutions.brother.com/BSC/public/us/us_ot/en/faq/faq/000000/002800/000037/faq002837_000.html?reg=us&prod=mfc7340_us_as&c=us_ot&lang=en Or Still Having Problem then follow Us On For Brother Printer Support

Follow these instructions:http://welcome.solutions.brother.com/BSC/public/eu/eu_ot/en/faq/faq/000000/002500/000055/faq002555_000.html?reg=eu&c=eu_ot&lang=en&prod=hl4040cn_all

This is a error about the head unit! it got problem with moving or lockate a position!Service is the solution for these :)

Check to see if the scanner works with the Windows built in Scan and Fax utility. If it does, then download this Twain Reset Utility http://support.visioneer.com/utilities/twain_reset.exe and reboot. Try to use the Brother scanning software after the reboot.

If this happens again turn of power to printer Then delete print job in printer queue or get into services and restart the printer spooler if needed

Try refreshing your browser.

Service Manual is here https://www.manualslib.com/products/Brother-Dp-540cj-689748.html ..