Top 20
Epson Stylus C80 InkJet Printer Questions & Answers
It has ink and it has no problem lights on but it
anything come on the monitor when you print ?
wont you to try print test page..... and see what the happen ?
if it s nothing, open the document print... and what the status ?
if you use Windows 7, there is usually came on a massage of information to resolve ?
Won't print
Epson printers will typically not print if any of the print cartridges are empty.
EPSON SYLUS C80 indicates "printer error: paper jam"
Epson has an interactive troubleshooting guide on their support site.
http://www.epson.com/cgi-bin/Store/support/SupportIndex.jsp
From the link above, choose your model printer. You will then be brought to the main page of your printer. Then, click on the "interactive help program" link under the Troubleshooting Guide section.
Through this, you will be able to find an article describing what all the indicator lights mean and how to possibly resolve the issues.
Print head jam
Iv'e seen these problems a 100000000 times with this printer and I found a little article you may wanna read before going farther with this machine!!!!
Go to http://.i18nguy.com
EPSON STYLUS RX 520 HAS AN ERROR E-91
The error E-91 on an Epson Stylus RX 520 indicates a communication problem between the printer and the cartridge. Here are some steps you can try to resolve the issue:
- Turn off the printer and unplug it from the power source.
- Remove all the ink cartridges and check for any damage or leaks. Replace any damaged or leaking cartridges.
- Clean the metal contacts on the ink cartridges and inside the printer with a soft, lint-free cloth. Make sure they are completely dry before reinserting the cartridges.
- Reinstall the ink cartridges and make sure they are properly seated.
- Turn on the printer and see if the error message still appears.
If the error message persists, try resetting the printer by following these steps:
- Turn off the printer and unplug it from the power source.
- Hold down the "Stop" and "B&W" buttons while plugging in the power cord.
- Keep holding the buttons until the printer starts to initialize.
- Release the buttons and wait for the printer to finish initializing.
- Try printing again to see if the error message is resolved.
If none of these steps work, there may be a hardware issue with the printer and it may need to be serviced by a professional technician.
Printer will scan & copy but not print.
Have you checked to be sure it is still set as your default printer?
Since it was connected to another computer when it was borrowed, something may have been changed.
Not finding what you are looking for?