20 Most Recent Epson Stylus RX425 Multifunction All-In-One InkJet Printer Questions & Answers

Yes, it is. Select CX4600(4500)/CX36x0(3500)/RX42x(430)/PM-A700.
RX42x covers RX420/RX425.
Minimise to tray, click on icon in notification area and select protection counter - reset protection counter.
Its there for a reason mind, so replace or clean the overflow sponge first!

OPEN SSC UTILITIES,DROP DOWN CONFIG BOX,SELECT RX420 MODEL,CLOSE BOX,THEN RIGHT CLICK ON TRAY ICON AND SELECT INK FREEZER,AND RESTORE VALUES BACK, OK ON COMPLETION,THEN RESTART YOUR PRINTER AND ALL SERVICE LIGHTS SHOULD BE OFF.

IF YOU HAVE ANY FURTHER ISSUE LET ME KNOW
THANKS
KEVIN

Hey, here's the whole process, step by step: Solved How To Reset Epson Ink Cartridges More info under: Gadget Preview

hi Edgar Allan Pagayona,I read you comment. I have Epson sx425w. Facing the same error E-02. I tried to find it out the switch as you explain but didn't get the switch. Can you please tell me the exact location of the switch. Thank You. Looking forward for your reply.Regards,VIPUL

Clean Cycle it that doesn't help get a new printer.

The cartridge may have not been seated. You should never do what you did, it could damage the cart and it will leak ink into the printer.

Hi Zanda if you haven't used your printer for that long, your printhead is more than likely dried up and clogged. Try running the "Head cleaning" utility 2-3 then print a "Nozzle check" (find both of these functions on "Maintenance" page under "Printer properties". If the nozzle check shows any print, you're on the right track. Run few more head cleans or try printing several pages (with LOT of colour) on high (best photo) quality. Combination of printing & nozzle checks works best. Be prepared to waste lot of ink doing this! If you get no print at all, it's probably time to get a new printer. There are other things you can try eg. buy set of cleaning cartridges, try to clean the printhead by placing some folded tissue soaked with Windex under the printhead or forcing some Windex through the printhead pickup (using a syringe & rubber tubing fitted over the pickup needle - where the cartridge usually sits) etc. Another way yet is to remove the printhead from printer and soak it in cleaning solution (if if you're handy and prepared to pull your printer apart). good luck! Lumir www.inkbank.com.au REFILLABLE CARTRIDGES

It could be a driver issue, roll back the driver I;e Uninstall and re-install a fresh one. If problem persist.

You need to install the "driver" before a printer will work. It tells the computer how to "talk" with the printer. The required file should be on the CD provided with the printer. If not, search the internet for "your printer name" and "driver".

Follow this link.

http://www.ssclg.com/epsone.shtml

At the bottom of page agree to terms and install.

On the "configuration page" and in the 1st drop down screen select your printer.

On the 2nd drop down screen is where I was getting confused as I have a Epson Stylus Photo RX425 but couldn't see it in the listings, it is there, look for:-
"Epson Stylus CX4600(4500)/CX36x0(3500)/RX42x(430)PM-A700" and select.

Next click this page off and in the botom right quick launch panel right click the multi coloured printer icon.

Select the "Pretection Counter" then "Reset Pretection Counter"

There you have it, switch off and back on the printer and all should be well.........