20 Most Recent Epson Stylus CX3200 All-In-One InkJet Printer - Page 10 Questions & Answers

This should do it.
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=14082&prodoid=24875245&infoType=Downloads&platform=Windows

Look for paper guides which is usually at the rear of the printer.

Open the printer and remove the ink. Clean around the ink carriage and the under the ink with alcohol and a cotton swab. Pay special attention to areas with copper contacts. Keep in mind too that some printers will not print, even with full ink, if the exact type of ink it expected you to have installed is not right. Double check that the ink is correct against the manual or written instructions inside the printer using the number not the shape. Not every cartridge that fits the printer necessarily works.

Hi there.
The print head is most likely faulty.
Iceman.

When the printer is, powered, turned on, and you open the cover; the print head is supposed to automatically reset itself to a position where you can change the ink.

Hello, Barbara. You may not have installed all the necessary printer drivers. If you have Vista, all you need is the Twain Driver and Epson Scan Utility v3.04A If you have Windows XP, you need to install: Printer Driver v5.4aA Status Monitor 3 v3.0 Twain Driver v5.70A They all can be found here: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=14082&prodoid=24875245&BV_UseBVCookie=yes&infoType=Downloads&platform=Windows&x=29&y=8 Hope this helps.

I had that same problem, when I used Generic INK.
Replace the cartridges with Genuine Epson Ink,
and then ran fine.

Weird eh?

Good Luck.

1. Go to: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=106003&prodoid=63075468&infoType=Downloads&platform=All
2. Select & download the drivers & software package that matches your operating system.

You're jets are pretty much shot. Have you recently used generic ink or used ink that has sat for a while? I had almost the same model and bought my ink in bulk not thinking about it and same thing occurred. Time to upgrade to a new printer...sorry.

http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=14082&prodoid=24875245&infoType=Downloads&platform=Windows

you can get the driver from support.epson.com website.

Are you using refill? Or original cartridge? But it seems that imposible to happen on original cartridge, Try using the Printer head decloging solution, Watch this video http://www.youtube.com/watch?v=Ztl_SiUdPLw&feature=fvw

Hope this helps

http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=14082&prodoid=24875245&infoType=Downloads&platform=All

Here is the link to your software.

please see the manual for cleaning

check for conflicts in the computers device manager if your using windows as an operating system, install and reinstall the driver. make sure you only install epson scan...you can download the latest driver in the website www.epson.com

http://www.eserviceinfo.com/equipment_mfg/Epson_22.html

go to the epson website/support and search for your printer ... you will find the driver there

You should see an accompanying error message on the display panel but if not then try removing and refuiiting the ink cartridges.

This is a common problem with compatible cartridges where the chip on the cartridge is faulty, missing or is not making contact correctly with the printer cartridge connectors. The first thing to do is make sure that the plastic seal has been removed from the chip and that it is free of any residual adhesive etc. You can clean this with a cotton bud soaked in isopropyl alcohol or VCR tape head cleaner. DO NOT USE SURGICAL SPIRIT or any other cleanser as this will either leave a residue itself or damage the plastics and rubbers in the printer.

Once cleaned reinsert the cartridge and try again. If this is still unsuccessful the best solution is to return the cartridges to the vendor where you bought them and get another brand of cartridges or use genuine original cartridges. When you find a reliable manufacturer of cartridges, stay with them. Don’t forget to clean the print head and realign & recalibrate the printer at every cartridge change for optimum results. Also make sure that you use high quality paper for the best images

just follow the link and select your os to download drivers.
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=14082&prodoid=24875245&infoType=Downloads

You can get the software here at link below.


http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=60421&prodoid=56291069&infoType=Downloads&platform=Windows


Good luck