Hello: I recently bought an Epson LX-300 Matrix printer (usb port) and I need to use with Mac OS 9 and Mac OSX. I have the the Power Print 4.5.1 software but it couldn't funtion. I tryed to find power Printer 5.0 but I couldn't. They said that Infowave company that manufacture the Power Print doesn't exist anymore.
Thanks for your important help.
try using "EPSON Generic 9-pin driver" on the MAC
Posted on Jan 24, 2008
When I use continuous paper with the push tractor, paper should advance the paper perforation to the tear-off position where I can easily tear off the printed page. When the printer receives data, it should automatically reverses the paper to the top-of-form position and starts printing only the data given for print and paper should stop at end of the print.
friends
you have to get the exact page size of your continuous paper. then you go to start -> printer and faxis -> then go to file -> and server properties.then create one paper which is exact sixe of your paper. Then go to printer preferances and select that paper.
to switch on tear off refer manual.
Hope this can solve the problem.
Posted on Oct 27, 2008
i got problem during installation or printer
the installation requires unidrv.hlp from my windows installer how can i locate that file
unidrv.hlp
Posted on Aug 22, 2009
Please help me, I want to change the font for Epson LX-300+. I already push the font button but it can't work at all. Thank you for your help.
Please answer me through e-mail: [email protected].
Just switch off your power switch and turn it on again and then press the paper out button for 3 seconds when you hear 1 beep that is the time you can change font using the font button switch and choose the font that want by pressing it.
Posted on Oct 06, 2008
NO CONECTION, tengo una laptop HP (Pavilion dv6921la Notebook) AMD TURION X2 64 con sistema operativo WINDOWS VISTA BASIC
ayundenme porfavor nesesito el driver para una epson lx 300 pero para windows 7, el en SO solo encuentro el driver para epson lx 300+ II y no imprime correctamente por favor ayudenme
mi correo es [email protected]
Posted on Jan 08, 2010
me falta archivo de unidrv.hlp
how get unidrv.hlp for lq2180
Posted on Jan 07, 2010
My Epson stylus TX300F after printing the 2nd page, in the window appeard PRINTER ERROR SEE YOUR DOCUMENTATION, I turn the printer off an then put it ON but still the message is coming again. Will you please help me fix this?
MY printer model is: EPSON STYLUS OFFICE TX300F
My printer appeard "PRINTER ERROR SEE YOUR DOCUMENTATION" on the printer's panel, I turn the printer off an then put it ON but still the message is coming again. So I cannot printer or do anything. How can we solve fix this problem?
MY printer model is: EPSON STYLUS OFFICE TX300F
Posted on May 11, 2011
need unidrv.hlp to install lx-300+II
Click here Click on above link and download driver and install. Let me know if you need further assistance. Thanks for using FixYa.
Posted on Feb 15, 2011
how to change epson lx 300 font size
Unfortunatelly you can not change the fontsize of the printer, but you can change the font.
To do this hold Pause button for 3 seconds, then push Font button. Two lights will light on and then off and will show you the current settings of the font. To change the font just click repeatedly the font button untill you reach the desired font following the combinations of light on the table below.
The fontsize is controled by the software you use.
Good luck!
Posted on Oct 08, 2011
how to change the font size of epson lx 350?
The font is determined by the document setting. Or you can check the PROPERTIES tab after you select PRINT.
Posted on Dec 11, 2013
439 questions posted
Usually answered in minutes!
193 Questions
20 Questions
10 Questions
8 Questions
7 Questions
