Top 20 Epson Stylus C86 InkJet Printer Questions & Answers

If that message comes, you have to try with another new cartridge. Just because it worked the previous day, doesn't mean it should work the following day. Once, when I refilled and used it, it worked and didn't work the following day. So try with a new cartridge and check the expiry date as well. You should take it to the dealer, if you have the receipt and he will gladly change for a new one. It happened to me once!

I am finding some truth to comments about unused ink cartriges In the > Stylus C84 registering as empty when they still sound full(colors go > empty even when you just print black). I am wondering how safe it > would be to use an chip resetter on a cartrige without refilling it and > allowing it to print until it truly is empty. Would there be a risk of > some air getting injected into the head (when the cartrige runs out), > thus ruining another printer (already went through one printer and got > it replaced through warranty, but I think that was just from leaving > the printer unused too long -- I don't have a resetter right now). >

Download this file Epson Adjustment Program to reset your printer blink lights because the ink counter of your printer is full and need to reset to zero

This site: Thread Epson Aculaser C8600 Service Req E520 says, "If you're not a technician, I'd suggest doing what the error says and calling a qualified service organization."

E520 is an error of the 2nd BTR (2nd rollers of transfer)

unplug, hold power button for 30 seconds

It sounds like the print head nozzles are clogged. Check your online user's manual (if it is not on the install disk that came with your printer) for the cleaning procedures. Here's a link if you can't find it: http://files.support.epson.com/pdf/xp400_/xp400_qr.pdf go to the section, "Checking the print head nozzles"

replace printer

Did you install the driver?http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=41661&infoType=DownloadsIf you have, clear your spooler file and try again.

Hi, Go to: http://www.epson.co.uk/Printers-and-All-In-Ones/Inkjet/Epson-Stylus-SX405/Drivers-Support where you should get all you need.

Epson Stylus InkJet Clear a paper jam in printer

All you need to do is to reset your device using the software resetterthis link :http://www.4shared.com/get/Tct88J0Z/ME320-TX121.html;jsessionid=915B4C7E4E51E44E0A13252FEA1C0E4F.dc516Download the software run the program,accept the condition given and select the particular adjustment or do this steps;1. Download the ME32 T121X RESETTER, extract it to your designated folder.2. Run the Adjustment program and click ACCEPT to continue.3. Click model name ..there are two options.ME 32 or T121X .4. Click DESTINATION or location at present then click ok.5. Click PARTICULAR ADJUSTMENT MODE then select WASTE INK PAD COUNTER.Then click OK.6. Check two boxes the MAIN PAD COUNTER and FL BOX COUNTER then Click INITIALIZATION.7. Icon box prompt and you to turn on and of the printer device>>then its all DONE>>>

Drivers, Online support and Manuals for your EPSON STYLUS T10 can be found here:

http://www.epson.com.ph/epson_philippines/printers_and_all_in_ones/inkjet/product.page?product_name=Epson_Stylus_T10&tab_index=4

Hi Khalid,Make sure your printer is set as the default printer on your PC.If you were printing many pages,try selecting the current or the page with the text only and try to print it.Check paper size settings,orientation,layout and printable area in your software and make sure they're in line with the paper you're using.If problem not solved,then you may need to clean the printhead to unclog the nozzles so that they enhance smooth flow of ink.

• Connect the printer to the computer and turn it on.
• On the taskbar of your PC,right click on the printers icon.[If there's no icon,go to your printer properties window and then click on the maintainace tab.Select on the head cleaning option].
• Select 'start' on the headcleaning pop up window that will appear.
• The printer will starting making noise and the green light will start to flash.
• After the cleaning the green light will stop.Select 'print nozzle check pattern' and then click on print.[make sure there is a loaded paper in the tray].
• Check the printouts.If gaps and lines appear on the paper,click 'clean' and if they're ok,click 'finish'.

Hope this helps.Thanks!Please rate this answer.

Hi,

Yes, you can. Get the printer driver online. Go to this website http://www.epson.co.uk/Printers-and-All-In-Ones/Inkjet/Epson-Stylus-SX215/Drivers-Support.

Select "Drivers and Software" and download the driver.

Thank you for visiting FixYa! We answer your concerns promptly for FREE. Please spare a few seconds to click on YES button and leave a short comment in return. Have a good one!

simple..you must have a dry paper or cloth then open the printer and find the head were the ink were it comes..just polish the dry paper to the head..that's all

check this site: http://www.epson.co.uk/Store/Printers-and-All-in-Ones/Epson-Stylus-SX515W/Drivers-Support. your service manual is there from their own site. hope this help. cheers :-)

You can download the Epson printer drivers from theirsupport WEB site. Please click on this link and
select your model printer todownload :- http://www.epson.com/cgi-bin/Store/jsp/index.do?BV_UseBVCookie=yes