20 Most Recent
Dyson DC07 Animal Bagless Upright Cyclonic Vacuum - Page 5 Questions & Answers
Dyson making loud noise
Not sure if this will help but mine sometimes make a loud noise as well and its usually due to hairs stuck UNDER the belt in the motor area. Get some sharp skinny scissors and long skinny pliers and get under that belt, cut the hairs and use the pliers to pull out those hairs. That noise is usually because too much hairs stuck under the thing that turns the belt and the belt cant spin so it makes a lot of noise. When i do this it solves the problem of noise, but eventually hairs will collect in there again and make the noise again so i just take the hairs out again and problem solved.
Vaccum will not turn on when upright
Do you have a DC17? It has two separate motors - one for the brushbar and one for the main motor - it sounds like the main motor is not turning on - call the Dyson helpline - they'll set you up for a repair with a repair dealer in your area.
How to install the wand handle catch
If the wand keeps coming away from the machine then it is likely that on the back of the machine the four pegs that hold the wand in place 1 or more are broken.
If this is the case then the fault is not the wand but the spine of the machine. You would require a new or sevond hand spine and it would mean completly stripping it.
My old dyson lost suction. Bought a new one,
For your new machine that does not power on - call the Dyson helpline - your power switch may need to be replaced. They'll set you up with a repair dealer who will fix it for you.
Replace filter catch
You might also be able to push the broken piece out from. The underside of the vacuum.
Not finding what you are looking for?